Using External Equipment; Listening To External Equipment; Recording The System's Source To External Equipment - JVC VS-DT6 Instructions Manual

Using External Equipment

1
4
7
10
BASS
MD/AUX
MD/AUX
FM/AM DISPLAY
AHB PRO
CLOCK
/TIMER

Listening to External Equipment

You can listen to external equipment such as MD recorder,
cassette deck or other auxiliary.
I First make sure that the external equipment is properly
connected to the System. (See page 7.)
1
Press the MD/AUX button.
"MD/AUX" appears on the display.
G On the Unit, press the SOURCE button until "MD/
AUX" appears on the display.
2
Start playing the external equipment.
• For operation of the external equipment, refer to its In-
structions.
STANDBY/ON
2 3
PLAY MODE
5 6
REPEAT
8 9
FM MODE
+ 10
TREBLE
SET
CANCEL
DIMMER SLEEP
OPEN/
CLOSE
VOLUME
SOURCE PRESET
SOURCE
Recording the System's Source
to External Equipment
You can record the System's source to external equipment
which is connected to the MD/AUX-IN/OUT or CD DIG-
ITAL OUT terminals of the System, such as cassette deck
or MD recorder, etc.
I First make sure that the external equipment is properly
connected to the System. (See page 7.)
1
Play the System's CD Player or tune in
to a station.
I The recording level is not affected by the VOLUME level
set by the System. Also it is not affected by the sound ef-
fects.
• For operation of the external equipment, refer to its Instruc-
tions.
• While using the tuner, no signals come out from the CD
DIGITAL OUT terminal.
VOL
19