Table of Contents
Advertisement
Remote control operation
Enlarging the centred area
You can enlarge the projected image down
to a centred area for emphasizing within the
range of 1x to 2x.
Enlarging the image
1. Press DIGITAL ZOOM +/- once.
The centred area of the image will then be enlarged
to 1.5x.
2. Adjust the image size by pressing DIGITAL ZOOM
+/-.
The image size will be changed in steps of 0.1.
NOTE:
• When the COMPUTER signal is projected, the enlargement range will be changed to 1x to 3x. When the FRAME LOCK
in POSITION menu is set to ON, the enlargement range is 1x to 2x. See "FRAME LOCK" on page 37.
• When the input signal is changed while the DIGITAL ZOOM is activated, the DIGITAL ZOOM will be cancelled.
• While the DIGITAL ZOOM is activated, FREEZE is not available.
Controlling the volume of the speaker
You can control the volume of the built-in
speakers and output sound. Press +/- to
control the volume.
E
NGLISH - 30
Shifting the centre point
Press F G I H to shift the centre point.
NOTE:
• Power consumption can be reduced if the volume level
is lowered.
Advertisement
Table of Contents
