Projecting 2 Images At A Time; Enlarging The Centred Area; Controlling The Volume Of The Speaker - Panasonic PT-FW100NTU Operating Instructions Manual

Remote control operation

Projecting 2 images at a time

You can project the image and another
source of image at the same time in double
window style. Press any button of RETURN,
MENU, DOUBLE-WINDOW or INPUT
SELECT buttons to return to the normal
projection style.
NOTE:
• FREEZE and VOLUME controls are available with the
first image only.
• While DOUBLE-WINDOW is activated, DIGITAL
ZOOM, INDEX-WINDOW and AUTO SETUP are not
available.
• While DOUBLE-WINDOW is activated, the main menu
will not be displayed.
• The second image will apply to the value of the
PICTURE settings of the first image except
CONTRAST and BRIGHTNESS.
• COMPUTER and NETWORK signals will not keep the
adjusted aspect ratio.

Enlarging the centred area

You can enlarge the projected image down
to a centred area for emphasizing within the
range of 1x to 2x.
NOTE:
• When the COMPUTER signal is projected, the
enlargement range will be changed to 1x to 3x. When
the FRAME LOCK in POSITION menu is set to ON, the
enlargement range is 1x to 2x. See "FRAME LOCK" on
page 33.
• When the input signal is changed while the DIGITAL
ZOOM is activated, the DIGITAL ZOOM will be
cancelled.
• While DIGITAL ZOOM is activated, FREEZE is not
available.
Enlarging the image
1. Press DIGITAL ZOOM +/- once.
The centred area of the image will then be enlarged
to 1.5x.

Controlling the volume of the speaker

You can control the volume of the built-in
speakers and output sound. Press +/- to
control the volume.
E
NGLISH - 26
Unavailable combinations
The following combinations are not available.
COMPUTER1 - COMPONENT
COMPUTER2 - NETWORK
S-VIDEO - VIDEO
S-VIDEO - COMPONENT
VIDEO - COMPONENT
Switching the signal
In default, the first image is displayed on the left
and the second image is displayed on the right.
You can switch and cycle through the signals of the
second image by pressing F G
Image 1
COMPUTER1 COMPUTER2
NETWORK COMPONENT
2. Adjust the image size by pressing DIGITAL ZOOM
+/-.
The image size will be changed in steps of 0.1.
Shifting the centre point
Press F G I H to shift the centre point.
NOTE:
• Power consumption can be reduced if the volume level
is lowered.
Image 1
Image 2
S-VIDEO
VIDEO