Panasonic PT-D1000 Specifications page 60

2.151. SELF CHECK Information
Hexadecimal
Remarks
Response (Callback)
In the period when the command can be accepted
Hexadecimal
Acceptability
SECURITY
Yes
Parameters (*2—*17)
Bit Name
0 Temperature warning (IN)
1 Temperature warning (OPT)
2 Temperature warning (OUT)
3 Low temperature warning (OPT)
4 Temperature error (IN)
5 Temperature error (OPT)
6 Temperature error (OUT)
7 Low temperature error (OPT)
8 Lamp 1 operating time warning
9 Lamp 2 operating time warning
10 Lamp 3 operating time warning
11 Lamp 4 operating time warning
12 Lamp 1 operating time exceeded
13 Lamp 2 operating time exceeded
14 Lamp 3 operating time exceeded
15 Lamp 4 operating time exceeded
16 Lamp 1 going out
17 Lamp 2 going out
18 Lamp 3 going out
19 Lamp 4 going out
20 Lamp 1 lighting failure
21 Lamp 2 lighting failure
22 Lamp 3 lighting failure
23 Lamp 4 lighting failure
24 Lamp 1 not installed
25 Lamp 2 not installed
26 Lamp 3 not installed
27 Lamp 4 not installed
28 AC power supply voltage drop
warning (less than 90 V)
29 Lamp unit cover is not closed
30 —
31 —
02h *1
STX ID Command
02h *5 FEh
STX ID
STNDBY NO SIGNAL
Yes Yes
Description
Intake air temperature is the specific value or higher.
Optical module (DMD surroundings) temperature is the
specific value or higher.
Exhaust air temperature is the specific value or higher.
Optical module (DMD surroundings) temperature is less than
the specific value.
Intake air temperature is the specific value or higher.
Optical module (DMD surroundings) temperature is the
specific value or higher.
Exhaust air temperature is the specific value or higher.
Optical module (DMD surroundings) temperature is less than
the specific value.
Lamp cumulative usage time is the specific value or longer.
Lamp cumulative usage time is the specific value or longer.
Lamp-Goes out after turning on.
Lamp ignition failure
Lamp not installed, or Lamp memory read failure
Lamp unit cover is not closed for 1 second or longer.
FEh FEh
Option
FEh *2 *3
SHUTTER TEST PATTERN
Yes Yes
60/62
03h
ETX
*4 — *15
Parameters
REMOTE2
Yes
*16 *17 03h
Condition of Clear Bit
It is less than the specific
value.
It is less than the specific
value.
It is less than the specific
value.
It is the specific value or
higher.
It is less than the specific
value.
It is less than the specific
value.
It is less than the specific
value.
It is the specific value or
higher.
Lamp replacement
Executes the lamp
turning on processing.
MAIN POWER ON after
the lamp is installed, or
Lamp memory
initialization
POW ER ON after the lamp
unit cover is closed