Gree GMV-ND36ZD/A-T Owner's Manual page 13

Multi Variable Air Conditioners Floor and Ceiling Type Indoor Unit
4.1.2 Suspend the Indoor Unit
(1) Determine the location of the hanger through the paper template, and then remove the
paper template, as shown in Fig.4.1.2.1 left.
(2) Insert the anchor bolts into the drilled holes, and drive the pins completely into the
anchor bolts with a hammer, as shown in Fig.4.1.2.1 right.
(3) Remove the right and left side panels, as shown in Fig.4.1.2.2.
(4) Put the hanger bolt into the clasp of the indoor unit and tighten screws on the hanger
to prevent the indoor unit from moving, as shown in Fig.4.1.2.2.
(5) Reinstall and tighten the right and left side panels, as shown in Fig.4.1.2.3.
(6) Adjust the height of the unit to make the drain pipe slant slightly downward so that the
drainage will become much smoother, as shown in Fig.4.1.2.3.
Floor type
Fig.4.1.2.1
Fig.4.1.2.2
9