Kenwood DRV-A601WDP Instruction Manual page 26

Basic Operation
-Video Menu
Access the VIDEO MENU by pressing the MENU button while in VIDEO MODE.
Use the UP and DOWN buttons to select setting options and press the OK button to enter
the sub-menu.
Once you access the sub-menu, highlight the desired setting and press the OK button to
confirm your selection and to return to the VIDEO MENU.
Press the MENU button twice to return to video mode.
TIP:
- You are not able to access the device menu while the camera is recording.
• Resolution: Choose the video resolution.
OPTIONS: 1440P 30fps Dual / 4K 30fps (default) / 1440P 30fps
• Video Length: Set the length for each individual video clip. The video recorded by
the device will be split and stored as individual video clips. The loop recording
function will automatically overwrite the oldest and non-protected video clip when
the memory card is full.
OPTIONS: 1 Minute (default)/3 Minutes
• Exposure: Adjust exposure levels settings.
OPTIONS: +2/+1/0 (default)/-1/-2
Parking Mode Sensor: Parking mode function will be available after turning on the
•
parking mode sensor and connecting the hardwire kit CA-DR1030(optional accessory) to
the permanent power.
OPTION: High/Medium/Low/Off (default)
<Normal Mode to Parking Mode>
If the device does not detect any vibration more than 5 minutes, it will turn off the
device itself automatically and enter the parking mode.
Resolution
Video Length
Exposure
Parking Mode Sensor
Enter
OK
23
Back
MENU