Table of Contents
Advertisement
4.3 HANDLE
-
Place one lower bar on each side of the machine. Add a screw and a knob to secure the bars.
-
Place the upper handle on the bars. Add the knob and the screw. Close the knob and tighten the screw to
fix the handle.
-
The position of the upper handle can be changed: untighten a little the screw and open the knob. You will
able to change the position of the upper handle. Then, close the knob and tighten the screw.
-
Install the control bar/propulsion bar by adding the extremity in the holes situated on the upper handle.
13
Advertisement
Table of Contents
