6. Demonstration and Test
In this chapter, we give an example that can be used to test the function of WIZ1000
The testing environment is as below.
6.1.
Install as below steps.
STEP 1: By using RJ45 Ethernet cable, connect the WIZ1000 to the network.
Copyright © WIZnet All Rights Reserved
Downloaded from
Elcodis.com
electronic components distributor
1) RS232 Port
2) LAN Port
Hardware
1) Configuration Tool Program
Software
2) Hyper Terminal
Table 10. Testing Environment of WIZ1000
Hardware Interface
Serial Cable
PC
1) WIZ1000 Device Server
2) Serial Cable
3) LAN Cable
4) DC5V Power Adaptor
Figure 18. WIZ1000 Interface
WIZ1000
Power
Reset
LAN Cable
WIZ1000 | 34 page