Above process is shown in the serial console as below figure.
Copyright © WIZnet All Rights Reserved
Downloaded from
Elcodis.com
electronic components distributor
1
Input "+++"
2
Check "<E>" response
3
Input "<WI192.168.11.3>"
4
Check "<S>" response
5
Input "<RI>"
6
Check "<S192.168.11.3>" response
7
Input "<WR>"
8
Check "<S>" response
9
Module re-booting
Table 8. Serial Configuration Testing Process
WIZ1000 Ver.01.00
>Config socket : OK
>Listen : OK
<E><S><S192.168.11.3><S>
WIZ1000 Ver. 01.00
>Config socket : OK
>Listen : OK
Figure 15 Serial Configuration Console Display
Enter Serial Configuration mode
Successfully entered
Change the IP address to 192.168.11.3
Sucessfully change the IP address
Check IP address of the module
Check changed IP address
Re-boot
Successfully re-booted
WIZ1000 | 29 page