Table of Contents
Advertisement
Locking the Control Panel
Buttons
You can lock the buttons on the Control
Panel to prevent the appliance from
operating due to unforeseen reasons, such
as a child manipulating the buttons.
Press the Off Timer button for 3 seconds or
longer during the operation.
•
will be displayed on the display panel
for the concentration of particles.
(CL : Child Lock)
NOTE
• You can turn off the lock function in the
same way as turning it on.
• It can be set regardless of the appliance
operation.
• If you pull out the power plug in lock set
status, the lock setting will be cleared.
• You can also lock or unlock when the
operation has stopped.
22
Turning off the Screen
Sets the screen to sleep mode.
Press the Swing button for 3 seconds or
more during the operation.
•
(Screen Off) is displayed on the status
display panel.
• Each time the button is pressed, the mode
changes in the following order: maximum
screen brightness → medium screen
brightness → screen off.
NOTE
• When you stop the operation by pressing
the Start/Stop button with the Screen
Off set, the Screen Off setting will be
maintained when the appliance is turned
on again.
• When you press any button while the
Screen Off function is operating, the
screen will turn on in medium screen
brightness for 10 seconds and then the
Screen Off function will operate again.
• The air purifier operates normally in the
changed screen brightness.
Advertisement
Table of Contents
