LG DSE6S Owner's Manual page 59

The product • Did you turn off the wireless router and turn it on again?
does not
connect to the
• Have you installed a new wireless router?
Wi-Fi network
• Did you change the settings of the wireless router?
• Unplug the router and plug it in after 10 seconds. Then try to connect after network
• Changing the wireless channel on your router can help reduce wireless interference.
A Enter the IP address on your smartphone, PC, or MAC, or use the setup wizard CD to
B Find the wireless settings page and change the wireless channel of your 2.4 GHz
C Save the settings and restart the wireless router.
- Turn off the product and then turn it on again.
- You will need to reconfigure the network settings of the product. ([ See
"Connecting with a Smartphone via Wi-Fi" on page 6.)
- If the router password contains some special characters (such as ` ' " + / \ ; : - _ ^ &
() <>) or emoticons, the sound bar may not be connected. It is recommended to set
a password using a combination of English letters and numbers.
- It is recommended to set the security type of the wireless router to WPA2.
recovery.
(Here is how to change the wireless channel of the most common routers. For the
exact details, refer to your router's instruction manual.)
log into the router setup page. This can only be done when the router is connected
to the network via Wi-Fi or an Ethernet cable.
/ 5 GHz network. If the "Auto" channel is enabled, disable it and set up a specific
channel.
- If the router channel is 2.4 GHz, 6 ch / 11 ch
- If the router channel is 5 GHz, 48 ch / 149 ch
- Remove the power cable from the router, wait 5 seconds, and reconnect the power
cable. When the router is completely powered on, try connecting it again.
59