Do you have a question about the SH5 and is the answer not in the manual?
Questions and answers
Hamilton tchembani
April 17, 2025
How to reset LG sound bar without remote control if subwoofer is not pairing with sound bar
1 comments:
Mr. Anderson
May 9, 2025
To reset the LG SH5 sound bar and subwoofer without a remote control if the subwoofer is not pairing:
1. Reset the Subwoofer: - Press and hold the Pairing button on the subwoofer for 5 seconds. - The LED will flash alternately red and green. - Unplug the subwoofer’s power cord. - Wait until the LED turns off completely. - Plug the power cord back in.
2. Turn on the Sound Bar: - Use the Power button located on the rear panel of the sound bar to turn it on.
The sound bar and subwoofer should automatically reconnect. If successful, the subwoofer's green LED will stay on.
Page 2
Front Panel Subwoofer Connection Place the wireless subwoofer near the speaker and follow steps below. Connect the power cord of wireless subwoofer to the outlet. Turn on the main unit. : The buttons are located on the rear. The sound bar and wireless subwoofer will be automatically connected.
Page 3
TV Connection Remote control Connect with the Sound Bar and TV using Optical ( ) or HDMI ARC ( ). Optical Connection Connect the sound bar to the TV using Optical cable. Set up [External Speaker (Optical)] on your TV setting menu. Turns down the volume at night.
Page 4
Networked standby : 0.5 W consumption (If all network ports are activated.) Hereby, LG Electronics declares that the radio equipment type Wireless Sound Bar is in compliance with Directive 2014/53/ y Model : DA-38A25 EU. The full text of the EU declaration of conformity is...
Need help?
Do you have a question about the SH5 and is the answer not in the manual?
Questions and answers
How to reset LG sound bar without remote control if subwoofer is not pairing with sound bar
To reset the LG SH5 sound bar and subwoofer without a remote control if the subwoofer is not pairing:
1. Reset the Subwoofer:
- Press and hold the Pairing button on the subwoofer for 5 seconds.
- The LED will flash alternately red and green.
- Unplug the subwoofer’s power cord.
- Wait until the LED turns off completely.
- Plug the power cord back in.
2. Turn on the Sound Bar:
- Use the Power button located on the rear panel of the sound bar to turn it on.
The sound bar and subwoofer should automatically reconnect. If successful, the subwoofer's green LED will stay on.
This answer is automatically generated