Pkm BKF4-2KB G Instruction Manual page 49

1. Before installing the hob to the worktop, the adhesive seal has to be fixed on the
bottom edge of the hob properly.
The seal has to be fixed properly. The outer side of the seal must match the
bottom outer edge of the hob (s. fig. below). The seal must be fitted tightly on
the bottom edge of the hob (no overlaps, no gaps etc.) to prevent liquids etc.
from entering the installation opening subsequently.
1
2
3
4
5
6
2. Insert the hob into the installation opening and push it downward carefully until
the hob is in firm contact to the worktop.
3. Fix the hob at the bottom of the worktop using the fixing brackets (s. below).
I
NSTALLATION OF THE HOB
Seal
Hob
Worktop
Outer edge of the hob
Outer side of the seal
Bottom of the hob
49
: