Preparing the Answering System
Caller's Recording Time
You can select "1 minute", "2 minutes", "3 minutes" or "Greeting only" for the caller's
recording time. The factory preset is "3 minutes".
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Press the soft key (
answering".
4
Scroll to "Recording time" by pressing
[d] or [B], then press the soft key (
5
Select the recording time by pressing [d] or [B].
• You can also select the recording time by
pressing [1], [2], [3], or [0] (Greeting only).
6
Press the soft key (
If you select "Greeting only", the unit will answer a call with the greeting
message, and then hang up. The unit will not record any incoming messages.
The base unit will display "
24
Handset
) at "Set
SELECT
), then press [OFF].
SAVE
" instead of the number of messages.
Initial setting
).
SELECT
Set answering
Recording time
).
SELECT
Recording time
:3min