INIM Electronics FireVibes WSB1010 Manual

INIM Electronics FireVibes WSB1010 Manual

Wireless sounder base, wireless sounder base + visual alarm device (white led), wireless sounder base + visual alarm device (red led)

Advertisement

Quick Links

Wireless Sounder Base + Visual Alarm Device (White LED)
Wireless Sounder Base + Visual Alarm Device (Red LED)
WARNINGS AND LIMITATIONS
Our devices use high quality electronic components and plastic materials that are highly
resistant to environmental deterioration. However, after 10 years of continuous operation, it is
advisable to replace the devices in order to minimize the risk of reduced performance caused
by external factors. Ensure that this device is only used with compatible control panels. Detec-
tion systems must be checked, serviced and maintained on a regular basis to confirm correct
operation. Smoke sensors may respond differently to various kinds of smoke particles, thus
application advice should be sought for special risks. Sensors cannot respond correctly if
barriers exist between them and the fire location and may be affected by special environmen-
tal conditions. Refer to and follow national codes of practice and other internationally recog-
nized fire engineering standards. Appropriate risk assessment should be carried out initially to
determine correct design criteria and updated periodically.
Use only in FireVibes fire detection and alarm systems.
WARRANTY
All devices are supplied with the benefit of a limited 5 years warranty relating to faulty materi-
als or manufacturing defects, effective from the production date indicated on each product.
This warranty is invalidated by mechanical or electrical damage caused in the field by incor-
rect handling or usage. Product must be returned via your authorized supplier for repair or
replacement together with full information on any problem identified. Full details on our war-
ranty and product's returns policy can be obtained upon request.
0051
INIM ELECTRONICS S.R.L.
VIA DEI LAVORATORI 10
FRAZIONE CENTOBUCHI
63076 MONTEPRANDONE (AP) - ITALY
22
0051-CPR-2781
EN 54-3:2001 + A1:2002 + A2:2006
EN 54-25:2008
WSB1010
WSB1010B
Wireless Sounder Base for fire detection and fire
alarm systems installed buildings
Level or class of the performance per each essen-
tial characteristic can be found in the Declaration of
Performance
WSB1010
Wireless Sounder Base
WSB1020
WSB1021
0051
INIM ELECTRONICS S.R.L.
VIA DEI LAVORATORI 10
FRAZIONE CENTOBUCHI
63076 MONTEPRANDONE (AP) - ITALY
22
0051-CPR-2782
EN 54-3:2001 + A1:2002 + A2:2006
EN 54-23:2010
EN 54-25:2008
WSB1020
WSB1020B
Wireless Sounder Base + Visual Alarm Device
(White LED) for fire detection and fire alarm
systems installed in buildings
Level or class of the performance per each essen-
tial characteristic can be found in the Declaration of
Performance
0051
INIM ELECTRONICS S.R.L.
VIA DEI LAVORATORI 10
FRAZIONE CENTOBUCHI
63076 MONTEPRANDONE (AP) - ITALY
22
0051-CPR-2782
EN 54-3:2001 + A1:2002 + A2:2006
EN 54-23:2010
EN 54-25:2008
WSB1021
WSB1021B
Wireless Sounder Base + Visual Alarm Device
(Red LED) for fire detection and fire alarm systems
installed in buildings
Level or class of the performance per each essen-
tial characteristic can be found in the Declaration of
Performance

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FireVibes WSB1010 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for INIM Electronics FireVibes WSB1010

  • Page 1 Full details on our war- ranty and product’s returns policy can be obtained upon request. 0051 0051 0051 INIM ELECTRONICS S.R.L. INIM ELECTRONICS S.R.L. INIM ELECTRONICS S.R.L. VIA DEI LAVORATORI 10 VIA DEI LAVORATORI 10...
  • Page 2 Tamper switch Output selection Link program DIP switch switch Battery A Battery B lodgement lodgement LED indicator Acoustic alarm outlet Sound diffuser Picture 1 www.inim.biz INIM ELECTRONICS S.R.L. VIA DEI LAVORATORI 10, FRAZIONE CENTOBUCHI, 63076 MONTEPRANDONE, ITALY...
  • Page 3: Deployment Procedure

    DEPLOYMENT PROCEDURE The general applicable procedure for the deployment of these products is the following: 1) Select a location for the base sounder. See LOCATION SELECTION. 2) Unbox the base sounder product from its packaging. 3) Detach the battery cover from the base sounder. See BATTERY COVER. 4) Detach the wall installation plate from the device.
  • Page 4: Location Selection

    Always install the battery cover, since it is a vital part of the anti-tampering feature. Make sure the battery cover is safely fixed, blocked and closed. www.inim.biz INIM ELECTRONICS S.R.L. VIA DEI LAVORATORI 10, FRAZIONE CENTOBUCHI, 63076 MONTEPRANDONE, ITALY...
  • Page 5 WALL INSTALLATION PLATE To detach / reinstall the wall plate to the base sounder refer to the following picture: Picture 4 Make sure that the sound diffuser cone printed on the wall plate corresponds to the acoustic alarm signal outlet of the base sounder. Drill templates on the wall plate are highlighted in the following picture: Picture 5 DCMIINE0WSB10XX-150...
  • Page 6 2) Set the Link / program switch on “ON”. 3) Insert the two supplied batteries into their device’s lodgments. Ensure that the batteries are installed properly, with their polarities matching the indications on the device. www.inim.biz INIM ELECTRONICS S.R.L. VIA DEI LAVORATORI 10, FRAZIONE CENTOBUCHI, 63076 MONTEPRANDONE, ITALY...
  • Page 7 LINKING - WAKE-UP “Wake-up” linking consists in associating one or more child devices to the FireVibes system altogether in a single operation. Wake-up is performed either through the FireVibes Studio software or the EWT100 / IWT100 keyboard-screen interface; it CANNOT be done through XWT100 devices.
  • Page 8 WSB1020 and WSB1021). Acoustic volume level Switches configuration High * Medium-High Medium-Low Table 3 EN 54-3 approved volume Visual emission power level Switch configuration High Table 4 www.inim.biz INIM ELECTRONICS S.R.L. VIA DEI LAVORATORI 10, FRAZIONE CENTOBUCHI, 63076 MONTEPRANDONE, ITALY...
  • Page 9 Tone number Main tone designation Main tone pattern description DIP switches Silent No sound 11111 Warble Tone 800Hz for 500ms, then 1000Hz for 500ms 11101 Continuous tone 970Hz continuous tone 01011 Slow Whoop (Dutch) 500-1200Hz for 3500ms, then off for 500ms 10101 German DIN tone 1200-500Hz swept every 1000ms (1Hz)
  • Page 10 660Hz continuous 00100 660Hz for 150ms, then OFF for 150ms 00110 800Hz continuous 10111 800Hz continuous 10011 800Hz continuous 01000 2900Hz continuous 00011 800Hz continuous 10000 Table 6 www.inim.biz INIM ELECTRONICS S.R.L. VIA DEI LAVORATORI 10, FRAZIONE CENTOBUCHI, 63076 MONTEPRANDONE, ITALY...
  • Page 11 FIXING THE BASE SOUNDER To fix the base sounder to the wall plate insert and fix the supplied screws in the holes highlighted in the following picture: Picture 7 HOST DETECTOR / PLASTIC COVER INSTALLATION If a detector is hosted, follow the setup instructions on its installation manual. Make sure the detector’s OWN battery cover is installed to avoid tamper detection events.
  • Page 12 5) Check that a normal condition persists (i.e. test smoke can stagnate in a detector’s smoke chamber causing the alarm to be triggered again). Local safety standards may require you to test these devices on a regular basis. www.inim.biz INIM ELECTRONICS S.R.L. VIA DEI LAVORATORI 10, FRAZIONE CENTOBUCHI, 63076 MONTEPRANDONE, ITALY...
  • Page 13: Technical Specifications

    TECHNICAL SPECIFICATIONS Specification Value Communication range with EWT100, IWT100 or XWT100 network 200 m (in open space) devices Wireless frequency band(s) of operation 868-868.6 MHz, 868.7-869.2 MHz, 869.4-869.65 MHz, 869.7-870.0 MHz Number of wireless channels RF output power (max) 14 dBm (25 mW) e.r.p. Operating temperature range -10 °C to 55 °C Maximum humidity (non condensing)
  • Page 14: Acoustic Specifications

    6 m coverage diameter, 4.24 m x 4.24 m (18 O1.7-6 (EN 54-23) ) square coverage Table 12 Wall Mounted Device Demonstration Re. Item WSB1020 and WSB1021 only www.inim.biz INIM ELECTRONICS S.R.L. VIA DEI LAVORATORI 10, FRAZIONE CENTOBUCHI, 63076 MONTEPRANDONE, ITALY...

This manual is also suitable for:

Firevibes wsb1020Firevibes wsb1021

Table of Contents