Date And Time; Date And Time - Panasonic KX-TG2750S Operating Instructions Manual

Programmable Settings

Date and Time

1
Press [FUNCTION/EDIT].
2
Scroll to "Date and time" by pressing [ ]
or [ ], then press [ ].
3
(1) Enter the year, and month and day using
4-digit numbers. (Ex. To set Apr. 7, 2003,
enter "2003" and "0407".)
(2) Enter the time (hour and minute) using a
4-digit number. (Ex. To set 9:30, enter
"0930".)
• If you enter a wrong number, press [ ] or [ ] to
move the cursor to the incorrect number. Enter
the correct number.
4
Select "AM" or "PM" by pressing [ ].
5
Press [ ] (Save).
• If 3 beeps sound, the setting is not correct. Start again from step 3.
• The clock starts working.
6
Press [EXIT].
• When entering the time, you cannot enter numbers greater than 12. Do not use
military time. (To set 13:00 hours, enter "0100", and select "PM"
If a power failure occurs, the time setting may be incorrect. When "
on the base unit display, adjust the date/time.
For Caller ID service users (p. 25)
• Caller ID information will reset the clock after the first ring if the adjusted time is
incorrect.
• If the time has not previously been set, the Caller ID information will not adjust
the clock.
• Caller ID information will automatically adjust the clock for daylight saving time.
16
Base Unit

Date and time

Date:2003.12.31
2
Time:12:00 AM
0-9=Date&Time
=AM/PM =Save
Date:2003.04.07
Time:09:30 AM AM
0-9=Date&Time
=AM/PM =Save
.)
" flashes