Installation; Connections - Panasonic KX-TG2750S Operating Instructions Manual

Installation

Connections

Base unit
Fasten the AC adaptor cord.
Hook
Power Outlet (AC 120 V, 60 Hz)
Single-Line Telephone Jack (RJ11C)
Telephone Line Cord
• Base unit: USE ONLY WITH Panasonic AC ADAPTOR PQLV10 (Order No.
PQLV10Z).
• Use Only a Panasonic Handset for the KX-TG2750S.
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
• If your unit is connected to a PBX which does not support Caller ID and voice mail
services, you cannot access those services.
During a power failure the base unit will work as a standard telephone, so that
you can make or answer external calls with the base unit handset.
You cannot use the base unit speakerphone and the cordless handset.
• If power returns to the base unit while having a conversation using the base
unit handset, you will not be able to use the speakerphone nor the cordless
handset and the display will be blank until you hang up the call. After hanging
up the call, you can resume all functions.
Charger unit
10
AC Adaptor
Power Outlet
(AC 120 V, 60 Hz)
AC Adaptor
Raise the antennas.
• Charger unit: USE ONLY WITH
Panasonic AC ADAPTOR KX-TCA1
(Order No. KX-TCA1-G).
• The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
Handset
Handset Cord