If The Following Appear On Your Display - Panasonic KX-TG2750S Operating Instructions Manual

2.4ghz expandable cordless phone system
Hide thumbs Also See for KX-TG2750S:
Table of Contents

Advertisement

If the Following Appear on Your Display...

Display message
System is busy.
Please try again
later.
---Incomplete---
Tom Jones
098-765-4321
Directory full
(The name/number is
an example.)
Directory
No items stored
Denied
Not found
2Way radio mode
(cordless handset only)
Invalid.
Please register
to the base unit
(cordless handset only)
Store VM access#
For assistance, please call: 1-800-211-PANA(7262)
Cause & Remedy
• If radio communication between the cordless
handset and the base unit is partially impaired, this
display will be shown.
• When the displayed item is being sent to the
destination unit, the directory memory is full and the
transfer is stopped. If you tried to send all of the
items, the item displayed with "Incomplete" and
items after it have not been transferred to the
destination unit. You can press [OFF] on the cordless
handset or [EXIT] on the base unit to exit
(p. 34, 35). To erase other stored items from the
destination unit directory, see page 33. You can send
all of the items again or send the items which have
not been transferred one by one (p. 34, 35).
• If the transfer is stopped and "Directory full" is
not displayed, it may indicate:
– the destination cordless handset is out of area, or
– the destination unit user may have pressed [
[
] on the cordless handset, or lifted the base unit
handset or press [DIGITAL SP-PHONE].
• Although you tried to send your directory items to
another extension, your directory is empty.
• When you call another unit to monitor, the Room
Monitor mode of the destination unit is set to OFF
(p. 41).
• When you tried to call another cordless handset in
2-Way Radio mode;
– the cordless handset is too far from your cordless
handset. Walk closer to the cordless handset.
– 2-Way Radio mode on the cordless handset is off
(p. 43).
– The cordless handset you called is talking with
another cordless handset in 2-Way Radio mode.
• The cordless handset you tried to make a call has not
been registered to the base unit. Register the
cordless handset (p. 20, 55).
• You have not stored the voice mail access number.
Store the number (p. 45).
] or
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents