Important Safety Instructions - Proline PLC253NFSL Instruction Manual

INSTALLATION: DO NOT INSTALL THIS APPLIANCE IN AREAS THAT ARE TOO
•
HUMID OR TOO COLD, SUCH AS THE OUTBUILDINGS, GARAGES OR WINE
CELLARS.
For disposal of the appliance:
•
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle the appliance responsibly to promote the sustainable reuse
of material resources, the refrigerants and the flammable insulation blowing gases.
The disposal should only be done through public collection points; contact the
waste treatment center nearest your home for more details on the correct
procedures for disposal.
For installation, servicing:
•
Appliance should be placed on a horizontal floor and keep the ventilation freely.
Don't try to replace or repair any components by yourself, ask the service agency
for help if necessary.
For handling:
•
Always handle the appliance to avoid any damage.
WARNING: For making ice (ice cubes), use potable water only.
•
Never freeze defrosted food except if they have been cooked before, in order to
•
eliminate harmful bacteria. Never refreeze seafood that has been defrosted.

IMPORTANT SAFETY INSTRUCTIONS

• If you are discarding an old appliance with a lock / catch fitted to the door, ensure that it is left in a disabled condition to prevent the entrapment of
young children when playing.
• Unplug the appliance from the mains socket when not in operation and before cleaning. Remove food before cleaning the appliance.
• Do not insert oversized food as this could cause incorrect operation.
• Extreme caution must be used when moving the appliance.
• Do not give children ice-cream and water ices direct from the freezer drawers as the low temperature may cause 'freezer burns' on the lips.
• Do not stand or support yourself on the base or door, etc.
• Effervescent drinks should not be stored in the freezer compartment.
Dispose of your old appliance
Fridges or freezers contain refrigerant and gases in the insulation.
Refrigerant and blowing gases must be disposed of professionally. Ensure that tubing of the refrigerant circuit is not damaged prior to proper disposal.
EN-3