Table of Contents
Advertisement
Slowly pull back the starter handle, which will bathe the cylinder wall with oil. Screw the spark plug
back in.
-
Clean the cooling fins of the cylinder and the housing.
-
Be sure to clean the entire machine to protect the paint.
-
Store the machine in a well‐ventilated place.
i.
Ordering replacement parts
Please quote the following data when ordering replacement parts:
-
Type of machine
-
Article number of the machine
-
Identification number of the machine
-
Replacement part number of the part required For our latest prices and information contact us.
The unit is supplied in packaging to prevent its being damaged in transit. This packaging is raw material and
can therefore be reused or can be returned to the raw material system. The unit and its accessories are made
of various types of material, such as metal and plastic. Defective components must be disposed of as special
waste. Ask your dealer or your local council.
5.
Troubleshooting guide
Fault
Possible causes
The motor does
Engine brake lever not pressed
not start
Spark plug defective
Engine does not
Air filter dirty Spark plug worn
run smoothly
Choke open
‐
The equipment
does not operate
smoothly and
‐
Motor is running,
roller
Blades imbalanced
V‐belt torn
17
Remedy
Press the engine brake lever Replace spark
plug
Top up fuel
Clean the air filter Clean/Replace the spark
plug
Set choke lever to "Run" position
‐ Have the blades replaced by a customer
service workshop.
‐ Have the V‐belt replaced by a customer
service workshop.
Advertisement
Table of Contents
