Erasing Messages; Erasing All Messages - Panasonic KX-TG2346 Operating Instructions Manual

Erasing Messages

The unit will announce the remaining recording time after playback if it is less than
3 minutes.
New messages cannot be recorded when:
—"Memory full" is heard.
—" " flashes on the base unit.
FULL
—the ANSWER ON indicator flashes rapidly (when the Answering System is on).
Erase unnecessary messages. We recommend you erase unnecessary messages
after each playback.
Erasing a specific message
Base Unit
Press [ERASE] while the message you want
to erase is being played.
• The unit beeps, then plays back the next message.
• To exit playback mode, press [STOP].
Handset
Press [ ] [4] while the message you want to erase is being played.
*
• The unit beeps, then plays back the next message
• To exit remote operation mode, press [OFF].

Erasing all messages

All recorded messages, except the greeting message, can be erased at one time.
Base Unit
Press [ERASE]
1
• "To erase all messages, press ERASE again" is heard.
Within 10 seconds, press [ERASE] again.
2
• The unit beeps, then announces "No messages".
• The base unit display shows "0".
Handset
Press [MENU].
1
2 Press Select at "Message play".
Press [ ] [5].
3
*
• The unit beeps, then announces "No messages".
• To end remote operation, press [OFF].
• Information in the Caller List will not be erased. To erase caller information, see
page 36.
For assistance, please call: 1-800-211-PANA(7262)
while the base unit is not being used
[ERASE]
ANSWER ON Indicator
.
53