Table of Contents
Advertisement
P r o gr a m mi n g O p ti on s wi t h t h e R e m ote - - - - P a g er
P r o gr a m mi n g O p ti on s wi t h t h e R e m ote
P r o gr a m mi n g O p ti on s wi t h t h e R e m ote
P r o gr a m mi n g O p ti on s wi t h t h e R e m ote
The features of your CompuStar 2000AS system can be changed by utilizing the
programming options with your remote-pager. Changing of these programming
options is intended be performed by your local authorized CompuStar dealer.
Please contact your local authorized CompuStar dealer for more information
concerning programming options.
Step 1.
Programming Option 1: Press Buttons (I+II) for 2 seconds.
Programming Option 2: Press Buttons (I+III) for 2 seconds. The car will chirp once
indicating that you are in the programming mode.
Step 2. Press Button IV within 2 seconds for the number of times to go to the option
number you want to change. You will hear a chirp and see the parking lights flash
each time you press Button IV.
Step 3. Wait a few seconds. You will hear a number of chirps and see a number of
parking light flashes corresponding to the number of the options you want to
change. If the number of chirps or flashes is not what you want, go back to Step 1.
Step 4. Press Button I for the factory settings and your car will respond by one
chirp and one flash. Press Button II for the option setting and your car will respond
by two chirps and two parking flashes.
•
If you hear a long chirp, you are going out of the programming mode,
please go back to Step 1.
•
If you want to change more options, go back to Step 1.
Option Resetting:
No.
Factory Setting -Button I
1 No unlock before remote starting
2 .5 sec lock/unlock pulse
3
Minimum Cranking Time for the Alternator Setting
1st Try 2nd Try 3rd Try
.8 sec .9 sec
©
Option Setting - Button II
Unlock before remote starting for
factory disarm.
2.0 sec lock/unlock pulse
1st Try 2nd Try 3rd Try
1.0 sec
1.0 sec 1.1 sec 1.2 sec
2001 Firstech, Inc. Page 15
P a g er
P a g er
P a g er
Advertisement
Table of Contents
