Table of Contents
Advertisement
11.9 Drying reminder
After cooking with a steam heating function the display prompts to dry the oven.
Press YES to dry the oven.
11.10 How to use: Drying
Use it after cooking with a steam heating function or steam cleaning to dry the cavity.
Step 1
Make sure the oven is cold.
Step 2
Remove all accessories.
Step 3
Select the menu: Cleaning / Drying.
Step 4
Follow the instructions on the screen.
11.11 How to remove and install: Door glasses
You can remove internal glass panels to clean it. The number of glass panels is different for
different models.
The camera module is located in the door handle. Be very careful not to damage or
crush the camera cable connecting the door and the oven cavity. Clean the camera
lens delicately with a soft cloth.
CAUTION!
Carefully handle the glass, especially around the edges of the front panel. The
glass can break.
Step 1
Open the oven door to the first opening position (approximately 70° angle).
Step 2
Hold the door trim (B) on the
top edge of the door at the
two sides and push inwards
to release the clip seal.
Step 3
Pull the door trim to the front
to remove it.
Step 4
Hold the door glass panels on
their top edge one by one and
pull them up out of the guide.
CARE AND CLEANING
2
B
1
41/56
Advertisement
Table of Contents
