Kashino Technology CSN-A1K User Manual page 33

CSN-A1K User manual








The nL and nH indicate the number of dots in the bit image in the
horizontal direction. The number of dots is calculated by nL+
nH×256.
If the bit-image data input exceeds the number of dots to be printed
on a line, the excess data is ignored.
d indicates the bit-image data. Set a corresponding bit to 1 to print a
dot or to 0 not to print a dot.
After printing a bit image, the printer returns to normal data
processing mode.
This command is not affected by print modes (emphasized,
double-strike, underline, character size, or white/black reverse
printing), except upside-down printing mode.
The relationship between the image data and the dots to be printed
is described in Figure 3.11.3.
When 8-dot bit image is selected:
Figure 3.11.3.
When 24-dot bit image is selected:
/
33 72