Kashino Technology CSN-A1K User Manual page 25

CSN-A1K User manual
Decimal:
Hexadecimal:
[Description] Select Double Width mode
To turn double width off, use LF or DC4 command.
ESC DC4 n
[Name] Disable Double Width mode
[Format] ASCII:
Decimal:
Hexadecimal:
[Description] Disable Double Width mode
ESC { n
[Name] Turns on/off upside-down printing mode
[Format] ASCII:
Decimal:
Hexadecimal:
[Range] 0≤n≤255
[Description] Turns upside-down printing mode on or off.


[Note]



[Default] n=0
[Example]
When the LSB of n is 0, upside-down printing mode is turned off.
When the LSB of n is 1, upside-down printing mode is turned on.
Only the lowest bit of n is valid.
This command is enabled only when processed at the beginning of a
line in standard mode.
In upside-down printing mode, the printer rotates the line to be
printed by 180° and then prints it.
27 14 n
1B 0E n
ESC DC4 n
27 20 n
1B 14 n
ESC { n
27 123 n
1B 7B n
/
25 72