Kashino Technology CSN-A1K User Manual page 16

CSN-A1K User manual
HT
[Name] Horizontal tab
[Format] ASCII:
Decimal:
Hexadecimal:
[Description] Moves the print position to the next horizontal tab position.
[Notes]




[Reference] ESC D
FF
[Name] Print the data in buffer and locate to the next black mark
[Format] ASCII:
Decimal:
Hexadecimal:
[Description] 

[Note] Only board with black mark function support this command.
ESC D n1...nk NUL
[Name] Set horizontal tab positions
[Format] ASCII:
Decimal:
Hexadecimal:
[Range] 1≤n≤255
0≤k≤32
[Description] Set horizontal tab positions.


[Note] 
This command is ignored unless the next horizontal tab position has
been set.
If the next horizontal tab position exceeds the printing area, the
printer sets the printing position to [printing area width+1].
Horizontal tab positions are set with ESC D.
If this command is received when the printing position is at [printing
area width+1], the printer executes print buffer-full printing of the
current line and horizontal tab processing from the beginning of the
next line.
Print the data in the buffer.
Locate to the black mark.
n specifies the column number for setting a horizontal tab position
from the beginning of the line.
k indicates the total number of horizontal tab positions to be set.
The horizontal tab position is stored as a value of [character width×n]
measured from the beginning of the line. The character width
includes the right-side character spacing, and double-width
HT
9
09
FF
12
0c
ESC D n1...nk NUL
27 68 n1...nk 00
1B 44 n1...nk 00
/
16 72