Kashino Technology CSN-A1K User Manual page 28

CSN-A1K User manual
Bit Off/On Hex
0
－ －
1
－ －
2 Off 00
On 04
3 Off 00
On 08
4 － －
5 － －
6
－ －
7 Off 00
On 80
[Note] 



[Default] n=0
[Reference] GS !
ESC & y c1 c2 [x1 d1...d(y×x1)]...[xk d1...d(y×xk)]
[Name] Define user-defined characters
[Format] ASCII:
Decimal:
Hexadecimal:
[Range] y=3
32≤c1≤c2≤126
0≤x≤12 (when Font A (12×24) is selected)
0≤d1 ... d(y×xk) ≤255
[Description] Defines user-defined characters.
y specifies the number of bytes in the vertical direction.

c1 specifies the beginning character code for the definition, and c2

specifies the final code.
 x specifies the number of dots in the horizontal direction.
[Note]  The allowable character code range is from ASCII code <20>H to
<7E>H (95 characters).
Decimal
－
－
0
4
0
－
－
－
0
128
When both double-width and double-height modes are set (including
right- and left-side character spacing), quadruple-size characters are
printed.
The printer can underline all characters (including right- and left-side
character spacing), but cannot underline the space set by HT and
90° clockwise-rotated characters.
When some of the characters in a line are double or more height, all
the characters on the line are aligned at the baseline.
It is possible to emphasize the Kanji character using GS !; the setting
of the last received command is effective.
ESC & y c1 c2[x1 d1...d(y×x1)]...[xk d1...d(y×xk)]
27 38 y c1 c2 [x1 d1...d(y×x1)]...[xk d1...d(y×xk)]
1B 26 y c1 c2 [x1 d1...d(y×x1)]...[xk d1...d(y×xk)]
Function
Undefined.
Undefined.
Double-width mode is OFF.
Double-width mode is ON.
Double-height mode is OFF.
Double-height mode is ON.
Undefined.
Undefined.
Undefined.
Underline mode is OFF.
Underline mode is ON.
/
28 72