Kashino Technology CSN-A1K User Manual page 26

CSN-A1K User manual
ESC - n
[Name] Turn underline mode on/off
[Format] ASCII:
Decimal:
Hexadecimal:
[Range] 0≤n≤2, 48≤n≤50
[Description] Turns underline mode on or off, based on the following values n：
n Function
0, 48 Turns off underline mode
1, 49 Turns on underline mode (1 dot thick)
2, 50 Turns on underline mode (2 dots thick)
[Note]





[Default] n = 0
[Reference] ESC !
ESC % n
[Name] Enable/Disable User-defined Characters
[Format] ASCII:
Decimal:
Hexadecimal:
[Range] 0≤n≤255
[Description] Selects or cancels the user-defined character set.


[Note] 

[Default] n=0
[Reference] ESC &, ESC ?
The printer can underline all characters (including right-side
character spacing), but cannot underline the space set by HT.
The printer cannot underline 90° clockwise rotated characters and
white/black inverted characters.
When underline mode is turned off by setting the value of n to 0 or
48, the following data is not underlined, and the underline thickness
set before the mode is turned off does not change. The default
underline thickness is 1 dot.
Changing the character size does not affect the current underline
thickness.
Underline mode can also be turned on or off by using ESC !. Note,
however, that the last received command is effective.
When the LSB of n is 0, the user-defined character set is canceled.
When the LSB of n is 1, the user-defined character set is selected.
When the user-defined character set is canceled, the built-in
character set is automatically selected.
n is available only for the least significant bit.
ESC - n
27 45 n
1B 2D n
ESC % n
27 37 n
1B 25 n
/
26 72