Related Manuals for Daewoo DAEB650D
Summary of Contents for Daewoo DAEB650D
- Page 1 DAEB650D Electric blower USER'S MANUAL www.daewoopowerproducts.com Manufactured under license of Daewoo International Corporation, Korea...
-
Page 2: Table Of Contents
INDEX 1. MAINTENANCE ............................2 2. TECHNICAL DATA ............................ 2 3. PARTS IDENTIFICATION ......................... 2 4. IMPORTANT SAFETY ..........................3 5. GENERAL SAFETY RULES ........................3 6. WARNING SYMBOLS ..........................5 7. EXPLODED VIEW ............................. 7 8. PARTS LIST .............................. 7 WARRANTY .............................. -
Page 3: Maintenance
1. MAINTENANCE Your tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upan proper tool care and regular cleaning. Warning! Befare performing any maintenance, switch off and unplug the tool. •... -
Page 4: Important Safety
4. IMPORTANT SAFETY While using electrical appliances, in arder to reduce the risk of fire, electric shock, and/or injury to persons, basic safety precautions should be followed, including the following: • Read all instructions carefully, even if you are familiar with the appliance. •... - Page 5 ter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c.
-
Page 6: Warning Symbols
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended far the particular type of power tool, taking into account the working condi- tions and the work to be performed Use of the power tool far operations different from those inten- ded could result in a hazardous situation. - Page 7 Electrical safety This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate. Assembly WARNING! Befare assembly, make sure that the tool is switched off and unplug. Mounting The Nozzle For Blowing Operations (Fig.
-
Page 8: Exploded View
8. EXPLODED VIEW 7. PARTS LIST 1. Wind pipe 16. Stator 2. Wind pipe ring 17. Handle cover 3. Left wind housing 18. Cord clamp 4. Tapping Screw 19. Switch 5. Nut 20. Adorn block/PCB 6. Fan 21. Motor mounting 7. -
Page 9: Warranty
WARRANTY CARD Product model Date of sale Company Serial number Client's signature Username The product is in good conditions and fully complete. Read and agree the terms of the warranty. GUARANTEE The warranty period starts from the date of sale of the products and covers 1 year for all power products. During the warranty period, free failures caused due to the use of poor-quality materials in the production and manufacturer workmanship admitted fault are removed. - Page 10 Manufactured under license of Daewoo International Corporation, Korea...
Need help?
Do you have a question about the DAEB650D and is the answer not in the manual?
Questions and answers