Table of Contents
Advertisement
• Configuration Properties
CONFIGURATION
NETWORK
PROPERTY
VARIABLE
SCPTdirection
----
SCPTmaxSendTime
----
[Number of fb]
SCPTminSendTime
----
[Number of fb]
SCPTlocation
----
SCPToemType
----
SCPTserialNumber
----
SEN TRONIC
TYPE
{ Range }
EXPLANATIONS
{ Default }
Bit 0, Bit 1: Setting the extension module (Power supply
must be reset when this configuration property is changed.)
0,0 : Without extension module
{SNVT_state}
1,0 : Discrete input (fb and other settings assigned to the 9th
{0 or 1}
and following points are invalid with 8-point input module.)
{0,0,0,0,0,0,0,0,
0,1 : Discrete output (fb and other settings assigned to the
0,0,0,0,0,0,0,0}
9th and following points are invalid with 8-point output
module.)
Set this property before an extension module is connected.
Bit 2 through Bit 15 : Invalid
Maximum time interval to send network variables (per fb).
(Power supply must be reset when this configuration prop-
erty is changed.)
{SNVT_time_sec}
Network variables are sent out in the specified intervals
{0.0,10.0...3600.0}
even when there is no change in the value.
{0.0}
No sending when a value less than 10.0 is set.
Invalid property when the assigned fb has no network vari-
ables to be sent to the network.
Minimum time interval to send network variables (per fb).
(Power supply must be reset when this configuration prop-
erty is changed.)
{SNVT_time_sec}
Network variables are sent out in the specified intervals
{0.0,0.2...3600.0}
even when there are changes in the value faster than the
{1.0}
interval.
No sending when a value less than 0.2 is set.
Invalid property when the assigned fb has no network vari-
ables to be sent to the network.
{SNVT_str_asc}
{30-character string}
Used to write Tag No. (name)
{""}
{SNVT_str_asc}
Used to indicate Model No. and Version
{e.g. "R7L-RS4_VER:0.10"}
{SNVT_str_asc}
Used to indicate Serial No.
{e.g. "ZZ123456"}
056 222 38 18
mailbox@sentronic.com
AG
R7L-RS4
EM-7804-C Rev.5 P. 6 / 19
www.sentronic.com
Advertisement
Table of Contents
