M-system R7L-RS4-R Instruction Manual page 12

• Configuration Properties
CONFIGURATION NETWORK
PROPERTY VARIABLE
SCPTnumDigits nviCVIn
SCPTnvType nviCVIn
SCPTnvType nvoCVOut
SCPTsetpoint[0] nviCVIn
SCPTsetpoint[1] nviCVIn
SCPTsetpoint[0] nvoCVOut
SCPTsetpoint[1] nvoCVOut
SEN TRONIC
TYPE
{ Range }
{ Default }
{SNVT_count}
{0,60...63}
{0}
{SNVT_nv_type}
{}
{SNVT_temp}
{SNVT_nv_type}
{}
{SNVT_temp}
Same as nviCVIn
Same as nviCVIn
Same as nvoCVOut
Same as nvoCVOut
056 222 38 18 mailbox@sentronic.com
AG
EXPLANATIONS
Source of the input to nviCVIn
0 : LonMaker bound output network variable
60 : fbRS[0] nvoRSVal
61 : fbRS[1] nvoRSVal
62 : fbRS[2] nvoRSVal
63 : fbRS[3] nvoRSVal
Match nviCVIn network variable type to that of the source
when using 60...63.
Indicates nviCVIn type.
For use with LonMaker and other tools.
Indicates nvoCVOut type.
For use with LonMaker and other tools.
Scaling setting
Output SCPTsetpoint[0] (nvoCVOut) is provided with the
input SCPTsetpoint[0] (nviCVIn).
Output SCPTsetpoint[1] (nvoCVOut) is provided with the
input SCPTsetpoint[1] (nviCVIn).
Output is proportionally provided to the input between
these setpoints.
SCPTsetpoint[0] < SCPTsetpoint[1]
www.sentronic.com
R7L-RS4
EM-7804-C Rev.5 P. 12 / 19