Table of Contents
Advertisement
No.
Feature
STO illuminated button
7.
AFV illuminated button
8.
AUDIO
9.
VIDEO
10.
TAKE
11.
OFF
12.
ALL
13.
No.
Feature
1-6 AUDIO INPUTS
1.
RCA connectors
1-6 AUDIO OUTPUTS
2.
RCA connectors
RS-485 terminal block
3.
EXT. SYNC BNC
4.
connector
SYNC Select switch
5.
VIDEO INPUTS BNC
6.
connectors
VIDEO OUTPUTS BNC
7.
connectors
DB-9 female RS-232
8.
connector
Should be pressed, followed by an input or output pushbutton to store the current
status in the non-volatile memory. For example. Press STO followed by INPUT
4 button to store Setup # 4 in the non-volatile memory.
To delete a setup from the memory, press the
STO and RCL buttons simultaneously, followed
by the input button (Setup number) to be
deleted.
When pressed, illuminates and selects the "Audio Follow Video" function. If the
audio configuration differs from the video configuration, the INPUT STATUS
display flashes the audio outputs that are to be reconfigured for AFV operation. In
such case, the TAKE button must be pressed to confirm the modification.
When pressed, illuminates and selects the audio mode (Breakaway) to enable
modification of the audio crosspoints.
When pressed, illuminates and selects the video mode (Breakaway) to enable
modification of the video crosspoints.
The machines can operate either in "Take" mode or in "Normal" (no user
confirmation for each action is needed) mode. Pressing the TAKE button toggles
the mode, and the button illuminates when in "Take Mode". In "Take Mode", any
action would cause the TAKE button to blink before implementation, and the user
is required to press TAKE again in order to implement the operation.
To cancel any operation initiated by pressing a
button, press the same button again.
When pressed after pushing an output button, disconnects that video/audio output
from the video/audio input. To disconnect all the outputs, press the ALL button
followed by the OFF button.
When pressed followed by an input button, connects that audio/video input to all
audio/video outputs.
Table 2: CVG-606xl Rear Panel Features
Audio inputs used to connect the stereo audio input sources.
Audio outputs used to connect the stereo audio output acceptors.
Used for bi-directional communication with another Matrix Switcher or PC
through RS-485 interface (see section 9.4 for more details concerning the RS-
485 operation).
Used for connection of an external video sync input. The external sync input
can be selected by the SYNC Select switch.
Selects either an external sync from the external source, or internal sync, which
is normally inputted via the VIDEO INPUT #1 connector (see section 9.3.1 for
more information concerning the sync selection).
Video inputs used to connect the video sources.
Video outputs used to connect the video acceptors.
Used for control of the Matrix Switcher (see section 9.4 for more details
concerning the RS-232 operation) from a PC, or remote control device, through
an RS-232 interface and a null-modem adapter (provided with the machine).
7
Function
NOTE
NOTE
Function
NOTE
Advertisement
Table of Contents
