BorMann PRO BWR5203 User Manual page 5

EN
Storing the Crane
1. Lower the Lifting Arm
2. Place the handle in the upright position
3.Store in a dry location, recommended indoors.
Note: If the crane is stored outdoors, be sure to lubricate all parts before and after use to ensure the crane stays in good working condition.
Factory Product
Any hydraulic jack found to be damaged in any way, is found to be worn or operates abnormally,believed to have subjected to an abnormal load. "SHALL BE
REMOVED FROM SERVICE UNTIL REPAIRED".Owners and/or operators should be aware that repair of the equipment requires specialized knowledge and
facilities. Only factory authorized parts,labels and decals shall be use on this equipment. Call customer service department Annual inspection of the is
recommended and should be made by the manufacturer's authorized repair facility to ensure that your jack is in optimum conditions and that the jack has
correct decals and safety labels specified for the manufacturer.
* The manufacturer reserves the right to make minor changes to product design and technical specifi ations without prior notice unless these changes signif-
icantly a ect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also
concern other models of the manufacturer's product line with similar features and may not be included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and
special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious
injury or death. The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
5
WWW.NIKOLAOUTOOLS.GR