High bright 15" tally teleprompter w/ travel case (9 pages)
Summary of Contents for Ikan PT4700S-TMW-PEDESTAL
Page 1
17” SDI Teleprompter, Pedestal & Dolly Turnkey w/ 19” Widescreen Talen Monitor Kit OVERVIEW Ikan’s Turnkey Broadcast Solutions include everything you need for your professional camera setup. This solution includes a 17” teleprompter, pedestal, and dolly. All of our systems have been tested internally for payload compatibility.
Page 2
What’s Included PT4700S-TMW 1 x Teleprompter Base 1 x Bracket with Glass 1 x Teleprompter Hood with Boot 17” Professional High Bright 1 x Monitor Beam Splitter Teleprompter w/ 19” 1 x AC Adapters with Cord Widescreen Talent Monitor (3G-SDI) 1 x PrompterPro Software 1 x Counterweight Set (2 x 2.5 lbs) 2 x D-Ring ¼-20”...
Page 3
Step 5 Extend the teleprompter hood open and attach teleprompter boot using the clips. It is suggested to align the seam with the bottom of the teleprompter hood. Step 6 Remove the monitor mounts from the teleprompter base using the included larger 4mm hex key to loosen from the 15mm rods. because we’re filmmakers too www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com...
Page 4
Step 7 Attach the monitor mounts on the back of the monitor’s VESA compatible threads using the 4 included screws and provided 2mm hex key. Step 8 After the monitor mounts are attached, adjust the 15mm rods to accommodate the monitor. Leave about 1 inch of room for the teleprompter bracket. Make sure the 15mm rods go through both set of monitor mounts.
Page 5
Foam Case To make your teleprompter more portable, we packed it in a reusable, high-quality foam. The shape and size of the foam was designed to fit into Ikan’s PT-CASE-V2. ** DO NOT THROW AWAY FOAM CASE ** because we’re filmmakers too...
Monitor Ports Monitor Menu Settings Video Config Contrast (White Level) Brightness (Black Level) Tint (Chroma Hue) Chroma (Chroma Saturation) Sharpness (Detail) RGB Setup – Manually configure RGB Return System Config Menu Duration – Set duration of how long menu stays on screen Video Ratio –...
Watch our VIDEO TUTORIAL on how to assemble Ikan Professional Telepromopters https://youtu.be/5TjIxzBc_Vc Specifications PT4700-SDI M19-TALENT Aspect Ratio Aspect Ratio 19:9 Backlight Backlight Brightness 1000 nits Brightness 1000 nits Build Material Aluminum Build Material Aluminum Diagonal 17” Diagonal 19” Input Signal...
Page 9
Quick Start Guide 19" High-bright Teleprompter LED Widescreen Monitor w/ Tally 19” SDI Monitor Compatible with Ikan Teleprompters What’s Included 1 x SDI Widescreen Teleprompter Monitor w/ Built-in Tally Light 1 x Power Adapter with Cable 1 x VESA Monitor Mount...
Page 10
Monitor Ports Monitor Menu Settings Video Config Contrast (White Level) Brightness (Black Level) Tint (Chroma Hue) Chroma (Chroma Saturation) Sharpness (Detail) RGB Setup – Manually configure RGB Return System Config Menu Duration – Set duration of how long menu stays on screen Video Ratio –...
Page 11
Specifications M19W 19" High-bright Teleprompter LED Widescreen Monitor w/ Tally Aspect Ratio 16:9 Brightness 1000 cd/m2 Diagonal 18.5 in. Input Signal 3G-SDI, VGA, HDMI Input Voltage DC 12v / 5A Power Consumption Product Weight 5.73 lbs. Product Dimensions 18.3" x 12.3 x 1.2"" Native Resolution 1920 x 1080 Shipping Weight...
Page 12
Assembly Steps Setting Up the Talent Monitor Using the shorter 4 x 10mm Screws, attach the VESA Monitor Mount. Make sure that the long end of the VESA Monitor Mount is pointing in the direction of the power button like the image above. Use the Mounting Knob to tighten the 15mm Rod Adapter to the VESA Monitor Mount. Make sure that the top of the VESA Mount is flush with the edge of the monitor.
Page 13
Attaching the Talent Monitor After both the talent monitor and teleprompter monitor are set up, slide the talent monitor on to the Teleprompter Base System. *WARNING* We recommend at least 1 inch of rod should be left inside the teleprompter base. www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re filmmakers too...
Page 15
EP880SK Pedestal 182.0cm 3.0-28.0kg 71.7in 6.6-61.7lbs 28.5kg 102.5cm 182.5in 15.0lbs 38.0cm 100mm 15.0in Component: Fluid head GH25 Pedestal EP880S Dolly EI7007 Pneumatic column Air-pressure in the pedestal system pneumatic column can be adjusted 165.5cm Fluid head with Double-wheel 125mm Extendable column casters with adjustable 100mm ball Standard kit...
Page 16
GH25 100mm Fluid Head 160mm/6.3in 73mm/2.9in 100mm 3.0-28.0kg 203mm/8.0in 6.6-61.7lbs 1-15 FEATURES 7 plus 0 grades of pan & llluminated leveling bubble 15 steps of counterbalance Additional standard 1/4" & tilt drag 3/8" screw holes SPECIFICATIONS Model GH25 Payload Range 3.0-28.0kg / 6.6-61.7lbs Counterbalance Range 1-15...
Page 17
EP880S Pedestal 165.0cm 30.0kg 65.0in 66.1lbs 86.0cm 23.9kg 33.9in 52.7lbs 38.0cm 100mm 15.0in Component: Pedestal EP880S Dolly EI7007 Pneumatic column Air-pressure in the pedestal system pneumatic column can be adjusted 165.5cm Ergonomic hand Double-wheel 125mm Extendable column wheel casters with adjustable Standard kit (extra part) High version kit...
Page 18
EI-7007 Super dolly Designed for pedestal system and other heavy duty system. The 125mm/5inch wheels with cable guard can be individually braked, also the movement direction can be fixed. Folds for transporting. Φ FEATURES 50cm 21.5cm 125mm Pull the knob to extend the dolly, Height : 21.5cm / 8.5in Casters diameter: 125mm / 4.9in.
Page 19
Pan bar Telescopic pan bar for GH08L, GH10L, GH15, GH25 heads SPECIFICATIONS Length range 405-605mm / 15.9-23.8in Net weight 385g / 0.8lbs...