Table of Contents
Advertisement
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
Basic Settings
Color Settings
Port Settings
Menu Settings
Input:DP
To use the controls:
1. Press
to open the main OSD menu.
2. Use
or
there is a sub-menu, you can move between options using
that function. Use
3. Press
to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
to the OSD. Press and hold
the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold
/ enable DDC/CI function. The words "DDC/CI disable" shows on the screen.
C32u-40
Brightness
Contrast
DCR
Display Mode
scaling mode
Over Drive
Video range
Resolution:3840*2160
to move among the icons. Select an icon and press
or
to make adjustments. Press
for 10 seconds to lock the OSD. This will prevent accidental adjustments
for 10 seconds to unlock the OSD and allow adjustments to
75
75
Off
Standard
Full Screen
Level 2
Full range 0-255
Refresh Rate:60Hz
to access that function. If
or
, then press
to save.
for 10 seconds to disable
to select
2-4
Chapter 2.
Advertisement
Table of Contents
