Page 3
1. Precaution Please read the precaution as follows to prevent any damages to the LCD Monitor. Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status. Prepare soft cloth and sponge as working platform to place LCD monitor horizontally.
Page 4
2. Appropriate tools Select the Appropriate tools for disassembly and re-assembly. Phillips screwdriver (#2) C/D disassembly tool Gloves or soft cloth...
Page 5
3. Disassembly SOP Put the monitor on a flat surface (Put the EPE on under the monitor) Remove 2pcs screw to release the stand hinge Tool : Screwdriver #2 Use the C/D disassembly tool to release Rear cover hook from disassemble hole on bottom Wedge your fingers between the rear cover and the middle frame on...
Page 6
Unplug OSD key cable and tear off the tape for releasing the cable Remove all screw for unlocking middle frame and main chassis. Tool : Screwdriver #2 Unplug the two panel lamp cables Disconnect LVDS cable from the panel, remove the main chassis...
Page 7
Lift up the middle frame for releasing the middle frame with panel Release the keypad board from the middle frame Release lamp cable from the hooks of the main chassis Take out the mylar sheet from Main chassis Remove 6pcs screws. Tool : Screwdriver #2...
Page 8
Take out PCB and peel off all mylar. Take out the Thermal pads from Power PCB...