Related Manuals for SACAGAWEA DESIGNS VK-2108
Summary of Contents for SACAGAWEA DESIGNS VK-2108
- Page 1 © 2022 REV 12/2022 Order #XXXXX VK-2108 - 10’ x 20’ Display 10’ 20’ Plan View SETUP INSTRUCTIONS If you would like to tell us about your experience with your setup instructions please email us at info@classicexhibits.com...
-
Page 2: Plan View
© 2022 Order #XXXXX Plan View = 1 sq foot... -
Page 3: General Setup Instructions
© 2022 Order #XXXXX General Information General Setup Instructions - Read entire setup instruction manual prior to WARNING unpacking parts and pieces. - The setup instructions are created specifically for this configuration. - Setup instructions are laid out sequentially in steps, including exploded views with detailed explanation for assembly. -
Page 4: Counter Assembly
© 2022 Order #XXXXX Counter Assembly Completed Assembly Bottom view of counter Counter Bolt Bolt Mounting Plate Mounting w/ Wing Nuts Plate 2) Mounting plate bolt in, 3) Place mounting plate onto 1) Mounting plate & wing nuts, packed position. [10] then tighten bolt, part in packed position. - Page 5 © 2022 Order #XXXXX Case Packing Top View of Each Level Wing Panels Lights Graphics Round Sign Setup Hardware Base Plates Level 1 (Bottom Level) Level 2 Level 3 Case 1 of 1...
-
Page 6: Front View
© 2022 Order #XXXXX Backwall Assembly Item Qty. Description Steps: Base Plate 1) Attach base plates [1] lower verticals [2A] [3A] [2C] and [3C], using bolts. 2A,2B 42” S40 Vertical Extrusion w/ A10 Clamps 2) Connect verticals [2A to 2B] [2C to 2D], [3A to 3B] and [3C to 3D], using 3A,3B 42”... - Page 7 © 2022 Order #XXXXX Backwall Attachments Steps: 1) Connect lights to top horizontal extrusions. See Light Connection detail. 2) Attach Wings to A10 clamps. See Clamp Attachment detail. 3) Attach Signs to vertical extrusions [2B] & [3B]. See Sign Attachment detail.