Related Manuals for SACAGAWEA DESIGNS VK-1228
Summary of Contents for SACAGAWEA DESIGNS VK-1228
- Page 1 © 2022 REV 11/2022 Order #XXXXX VK-1228 - 10’ x 10’ Display 10’ 10’ Plan View SETUP INSTRUCTIONS If you would like to tell us about your experience with your setup instructions please email us at info@classicexhibits.com...
-
Page 2: Plan View
© 2022 Order #XXXXX Plan View = 1 sq foot... -
Page 3: General Setup Instructions
© 2022 Order #XXXXX General Information General Setup Instructions - Read entire setup instruction manual prior to WARNING unpacking parts and pieces. - The setup instructions are created specifically for this configuration. - Setup instructions are laid out sequentially in steps, including exploded views with detailed explanation for assembly. -
Page 4: Counter Assembly
© 2022 Order #XXXXX Counter Assembly Completed Assembly Bottom view of counter Counter Bolt Bolt Mounting Plate Mounting w/ Wing Nuts Plate 2) Mounting plate bolt in, 3) Place mounting plate onto 1) Mounting plate & wing nuts, packed position. [10] then tighten bolt, part in packed position. - Page 5 © 2022 Order #XXXXX Case Packing Top View of Each Level Literature Trays Wing Panels Assembled Header Lights Base Plates Round Sign Graphics Counter Setup Hardware Monitor Mount Shelf Level 1 (Bottom Level) Level 2 Level 3 Case 1 of 2...
- Page 6 © 2022 Order #XXXXX Case Packing Top View of Each Level Front Infill Assembled Assembled Pedestal Pedestal Side Side Shelf Counter Top Level 1 (Bottom Level) Level 2 Level 3 Level 4 Case 2 of 2...
- Page 7 © 2022 Order #XXXXX Backwall Assembly Item Qty. Description Steps: Base Plate 1) Attach base plates [1] lower verticals [2A] and [3A], using bolts. 42” S40 Vertical Extrusion w/ A10 Clamps 2A,2B 2) Connect verticals [2A to 2B] and [3A to 3B], using connection bars [B]. 3A,3B 42”...
-
Page 8: Front View
© 2022 Order #XXXXX Backwall Attachments Item Qty. Description Steps: 7/8/9 1/1/1 Header Frame 1) Connect lights to top horizontal extrusions [5A/5B]. See Light Connection detail. 30.2” Curved Extrusion 2) Attach assembled Header Frame and affix graphic using Velcro. Light Connection Support Leg 3) Attach extrusions [10/11] and shelf to vertical [2A]. - Page 9 © 2022 Order #XXXXX MOD-1243 Pedestal Assembly Item Description 38” S40 Vertical Extrusion 2,2A 12” Z45 Horizontal Extrusion 25” Z45 Horizontal Extrusion Steps 1) Attach horizontals [2] and [2A] between verticals [1], with infills between. 2) Attach curved horizontals [3] between front verticals [1], with infill between. 3) Place shelf on lip of extrusions [2].