Before Operating This Set
Battery Installation
1
2
Two "R6 (AA)" size
3
Do not use rechargeable (Ni-Cd) batteries.
They are different in shape and performance and may fail to ensure correct operation.
! Battery cautions
The incorrect use of batteries can cause electrolyte leakage which will corrode the Remote Control or
cause the batteries to burst.
Old Batteries
Replacement both batteries at the same time.
Open the cover.
Apply slight downward pressure while pulling towards the
bottom.
Batteries: Use two "R6 (AA)" size batteries.
Insert the batteries ensuring correct polarity.
This is identifiable by the "+" and "–" symbols on both the
batteries and inside the battery compartment.
Replace the cover.
New Batteries
(alkaline with carbon zinc. etc.)
4
Don't mix battery types
Don't Recharge.