Picture Menu Operation
By pressing the PICTURE MENU button, you can sequentially select the Picture menus
as shown below:
Normal ( N ) Button
By pushing the Normal "N" button on the Remote Control while Picture or Sound Control
Function is displayed, the selected function will be changed to the Normal Mode. Normalization
will not occur if the function is not displayed when the "N" button is pushed. The Normal mode is
the factory preset condition. Returning to this original condition is called "Normalization".
Sound Menu Operation
By pressing the SOUND MENU button, you can sequentially select the Sound menus as
Wake Up Timer Button
1. Press the " WAKE UP TIMER" button.
2. Press the position left or right button to select the wake
3. After setting the wake up timer, switch the TV set to
up timer. (Wake up timer will increase or decrease by
10 minutes when left or right button is pressed.)
Wake up time can be set up to 12 hours.
stand-by mode. (LED light will blink ON and OFF
during stand-by mode)
For watching in brighter environments. This
menu selects a higher than normal level of
For watching in normal (evening) environments.
This menu selects normal level of contrast.
For watching in dark environments. This menu
selects reduced level of contrast.
For music programme for example.
For News programme for example.
For movie programme for example.
WAKE UP TIMER
WAKE UP TIMER