Colour System Selection - Panasonic Viera TC-29P22R Operating Instruction

Tuning Procedure

Colour System Selection

Use this function if a clear picture with weak colour is obtained when a Broadcast or
AV signal is received.
– +
PRE. TV/AV
1,3 2
1.
PRE.
MAIN MENU
2.
MAIN MENU
3.
PRE.
MAIN MENU
S-VIDEO VIDEO
Press the " PRE." (PRESET)
button 4 times.
Press the "MAIN MENU" and
"Position" buttons, until
"COLOUR SYS" is selected.
Press the Volume Up
" + " or Down button,
" – " repeatedly until the
optimum image is
produced.
Press the Position Left or
Right button repeatedly
until the optimum image is
obtained.
Press the "PRE" (PRESET)
button 5 times.
Press the "MAIN MENU"
button twice.
AV 2 IN
OR
L/MONO – R – AUDIO
1 PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 8
1 PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF
POS. CHANGE 1
GEOMAGNETIC 8
AUTO
NTSC 3.58
19
MAIN MENU
1,3
Colour System condition.
The Colour system will change
as shown:
PAL SECAM
NTSC 4.43
This returns the set to the
normal viewing condition.
This selected Colour System is
automatically memorized.
2
1