Before Operating This Set
Connect the Aerial Cable to the RF In Terminal
To obtain the best quality picture and sound, an external antenna, the correct cables (75 Ohm coaxial) and
the correct terminating plug will be required.
If a communal antenna system is used, you may require the correct connection cable and plugs between
the wall antenna socket and your television receiver.
Your local Television Service Dealer may be able to assist you in obtaining the correct antenna system for
your particular area and accessories required.
Any matters about antenna installation, upgrading of existing systems or accessories required, and the
cost incurred, are the responsibility of the customer.
If your existing antenna system uses 300 Ohm to 75 Ohm Balun, see Below.
RF In Terminal
300 Ohm to 75 Ohm Balun
Coaxial Aerial plug