Audio Mode Selection (Stereo/Sap/Mono); [Tv] Speaker - Panasonic CT-31G30T Operating Instructions Manual

Audio Mode (Stereo SAP Mono)
and [TV] Speaker
ACTION
Displays and Exits Menus
Located On Remote Control
_r__ Selects Desired
U _.._VOLI _._'1 VOL_ D _Me Fe,a_l_),spl.Wh.ayned
Selects or Adjusts
Features When
Menu is Displayed
(Audio) Mode Stereo/SAP/Mono
When Audio is broadcast in Stereo or SAP an ON
Screen display will appear on initial "Tum On" and
"Channel Change". The available choices will be
indicated in red.
1. Press the ACTION button to display the Main Menu.
2. Press the CH DOWN and VOL RIGHT buttons to
select the Audio Icon.
3. Press the ACTION button to display the Audio
Adjustment Menu.
_ AUDIO
AUDIO NORM NO
BASS IIIIIIIIIIIIIIII
TREBLE IIIIIIIIIIIIIIII
BALANCE !
MODE _ SAP MONO
SPEAKER ON
SURROUND OFF
AI SOUND ON
4. Press the CH UP or DOWN button to select
=MODE".
5. Press the VOL LEFT or RIGHT button to select
Stereo, SAP (Second Audio Programming) or
Mono. The selected mode will be underlined.
6. Press the ACTION button twice to exit the Audio
Adjustment Menu.
[TV] Speaker
- This feature is used to turn the
internal speakers "ON" or =OFF". It is used when the
Receiver is connected to an External Audio Amplifier.
(Refer to "To Audio Amp" section for further informa-
tion.)
1. Press the ACTION button to display the Main Menu.
2. Press the CH DOWN and VOL RIGHT buttons to
select the Audio Icon.
3. Press the ACTION button to display the Audio
Adjustment Menu.
_ AUDIO
AUDIO NORM NO
BASS llll llill llllli I
TREBLE tilt tllil llilil I
BALANCE -}
MODE STEREO SAP MONO
SPEAKER ON
SURROUND OFF
AI SOUND ON
Helpful Hints:
STEREO - Two channel Audio reception.
SAP - Second Audio Programming (typically used for
bilingual audio).
MONO - Use when stereo signal is weak.
- 29 -
4. Press the CH UP or DOWN button to select
"SPEAKER".
5. Press the VOL LEFT or RIGHT button to select
Speaker "ON" or "OFF"
6. Press the ACTION button twice to exit the Audio
Adjustment Menu.