Table of Contents
Advertisement
Attaching the Lens / Detaching the Lens
Before replacing the projection lens
Return the projection lens to the home position before detaching or attaching it. Attaching or detaching of the
projection lens may not be possible if the lens is not in the home position. For details on how to return the lens to
the home position, refer to the operating instructions of the projector.
Attention
z Turn off the projector before replacing the fisheye lens.
z Store the removed protection lens safely without subjecting it to vibration or impact.
z Remove the lens covers before attaching the fisheye lens.
Lens cover
z Do not tough the lens surface with your bare hands. Any fingerprints or smudges on these surfaces will be
magnified and lower the quality of the image displayed on the screen.
z The lens is made of glass. The lens could be damaged if brought into contact with or rubbed against hard
objects. Handle the lens carefully.
z Wipe off any dust or particles on the lens with a cloth that is soft, dry, and clean.
Do not wipe with fluffy cloths, cloths that contain oil or water, or dusty cloths.
z When using the fisheye lens, we recommend using it with the ET-PLF10C lens fixing attachment.
z When using the ET-PLF10C lens fixing attachment, the mounting bracket may not attach properly if the lens is
not moved to the home position before attaching.
Lens cover
Lens surface
Lens surface
ENGLISH-5
Advertisement
Table of Contents
