Displaying And Changing Program Settings; To View Or Access The Settings; To Change A Parameter Setting - nvent SPECTRACOOL S0603 6G Series Instruction Manual

DISPLAYING AND CHANGING PROGRAM SETTINGS

TO VIEW OR ACCESS THE SETTINGS

To access folder menus.
1. Press button to display passcode screen, the screen displays PSd on line 1 and 0000 on line 2.
2. Press button to access to passcode , the first digit of 0000 is flashing and press 3 more times until the
last digit of 0000 flashes.
3. Press arrow two times to change the 0 to 2. Press
NOTE: To exit the security level to the main screen wait one minute with no action or Press
arrow until LOG Out message displays, then press

TO CHANGE A PARAMETER SETTING

1. Once in the folder menu navigate to the desired setting to be changed using the
and button to access a menu or parameter.
2. To change a parameter Press
3. Press / arrow to the desire value.
4. Press button to save the setting and the screen will revert to the parameter mnemonic.
NOTE: IF BUTTON IS NOT PRESSED, THE NEW SETPOINT IS NOT SAVED.
To exit the parameter settings to the main screen wait one minute with no action or
Press
From the UoF screen Press
press
Selecting ESC returns to folder menu
Selecting LOG out returns to main screen
- 16 -
button and parameter value will begin to flash.
arrow few times until ESC displays, then press button to return to UoF screen.
arrow few times until LOG Out message displays, then
button to return to the main screen.
© 2023 nVent
for access to folder menus.
button.
arrow to scroll
89217666