nvent SPECTRACOOL S0603 6G Series Instruction Manual

Slim fit air conditioners

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

SPECTRACOOL

Slim Fit Air ConditionerS

All modelS

INSTRUCTION MANUAL

P/N 89217666

Rev. B

89217666

Table of Contents

Troubleshooting

Need help?

Do you have a question about the SPECTRACOOL S0603 6G Series and is the answer not in the manual?

Questions and answers

Summary of Contents for nvent SPECTRACOOL S0603 6G Series

Page 2: Table Of Contents
TABLE OF CONTENTS nVent Cooling Sales and Service Contacts ................................4 Warranty and Return Policy ....................................4 CE Declaration of Conformity ....................................5 Receiving The Air Conditioner ....................................9 Handling and Testing The Air Conditioner ................................9 PHASE MONITOR (460v Only) ................................9 How to Read Model Numbers ....................................
Page 3 3-Phase Symptoms and Possible Causes - Remote Access Control Version ..................71 F-GAS INFORMATION - S06 MODELS ................................. 72 F-GAS INFORMATION - S10 MODELS ................................. 72 F-GAS INFORMATION - S16 MODELS ................................. 72 © 2023 nVent 89217666 - 3 -...
Page 4: Nvent Cooling Sales And Service Contacts
NVENT COOLING SALES AND SERVICE CONTACTS EUROPE: Deutschland (Germany) +49 (0) 7082 794 0 France +33 (0) 3 88 90 64 90 Italia (Italy) +39 02 932 714-1 Polska (Poland) +48 22 209 98 37 Россия (Russia) +7 495 926 18 85...
Page 5: Ce Declaration Of Conformity
CE DECLARATION OF CONFORMITY Authorized by: 2/21/2018 Date Subject to Change Without Notice DOC: CE-00154-C © 2023 nVent 89217666 - 5 -...
Page 9: Receiving The Air Conditioner
Damage evident upon receipt should be noted on the freight bill. Damage should be brought to the attention of the delivering carrier -- NOT to nVent Equipment Protection -- within 15 days of delivery. Save the carton and packing material and request an inspection. Then file a claim with the delivering carrier.
Page 10: General Safety Information
NOTE: Do not reduce the time delay setting on the controller to less than 120 seconds. This may cause the compressor to cycle too rapidly, shortening the life of the compressor. SMART CONTROLLER (GENERAL ALARMS) See nVent Cooling Sales and Service Contacts on page 4 REMOTE ACCESS CONTROL (OPTIONAL) See Electronic Controlling Section on page 13–24 DOOR SWITCH If a door switch is available, connect it to the terminals marked WHT/DS1 and WHT/DS2.
Page 11: Mounting
12. Install two front screws. 13. Carefully reconnect the smart controller connectors . 14. Push the louvered grille and, where applicable, the center panel, onto the front panel. See Figure 6 on page 12. © 2023 nVent 89217666 - 11 -...
Page 13: Electronic Controlling Section
All alarms are outputted through the alarm relay. In addition, if nVent HOFFMAN network card (Remote Access Control (RAC) Module) is used the parameters that state above and alarms are accessible remotely through Ethernet connection utilizing SNMP, Modbus TCP, EtherNet/IP, and Profinet protocol .
Page 14: Controller Status Indication
Flashing while waiting for compressor to turn ON White Steady ON while compressor is running Evaporator Running White Electric heater ON White Primary and/or lead White controller Freeze control Compressor and Condenser fan OFF while illuminated White Power ON White © 2023 nVent 89217666 - 14 -...
Page 16: Displaying And Changing Program Settings
From the UoF screen Press arrow few times until LOG Out message displays, then press button to return to the main screen. Selecting ESC returns to folder menu Selecting LOG out returns to main screen © 2023 nVent 89217666 - 16 -...
Page 17: Models With °C Controllers
Alarm input contact - Door open/smoke detected ArOP Alarm output contact - all alarms NOTES: (1) The Alarm input contact - Door open/smoke detected is configurable (2) The alarm relay output logic is configurable © 2023 nVent 89217666 - 17 -...
Page 18: Real-Time-Clock Setting
ESC, then press button to return to the main screen or if no action for longer than 60 seconds the screen will be automatically revert to the main screen. NOTE: If no alarms are present then only ESC will be displayed in the folder. © 2023 nVent 89217666 - 18 -...
Page 19: To Reset The Alarms In Alarm History Folder
There are seven possible alarms (non-latching) detectable by the controller and are indicated on the controller display. All alarms are accessible locally. If a nVent HOFFMAN network card (RAC module) is used, alarms are also accessible remotely through the Ethernet and USB connection.
Page 20: Displaying Temperature Data On Screen
Parameter C21 controls the alarm relay output logic and can be accessed through security code “0022” in the PArF folder. Para Description Configuration Alarm relay output logic 0 = normally open (NO) – factory default 1 = normally closed (NC) © 2023 nVent 89217666 - 20 -...
Page 21: Primary-Secondary (Ps) Mode
6) All temperature setpoints and alarms can be viewed remotely if one of the ACUs is equiped with nVent HOFFMAN network card (RAC module). 7) Best recommendation is to configure the ACU that has nVent HOFFMAN network card to be the primary one...
Page 22 9. Set parameter H02 (device ID) to 1 to 10. This device ID will be different for each controller that is connected. The controller set to 1 will be the primary controller. Use numbers sequentially and don’t skip using a number. 10. Set parameter H03 (total number of controllers connected) to 1 to 10. © 2023 nVent 89217666 - 22 -...
Page 23: Lead-Lag (Ll) Mode
PArF, then press button to access to parameter menu 7. The screen displays C, press arrow to navigate to parameter H and then, press button to access to parameter H menu © 2023 nVent 89217666 - 23 -...
Page 24: Air Conditioner Unit Remote Communication Features
Air conditioners that include the optional nVent HOFFMAN network card (RAC module) have remote communication capabilities utilizing SNMP, Modbus TCP, EtherNet/IP, Profinet Protocol via Ethernet connection, and Modbus RTU protocol via USB connection. nVent provides Windows interface application software that is available to download free from nVent support link: https://go.nVent.com/remote-access-control-support-center.
Page 25: Usb Communication Mode
HOFFMAN air conditioners both domestically and globally at one central location at user’s own pace, so long as all air conditioners are configured in the same subnet in the network. nVent HOFFMAN PC Interface Tool also supports text message and email alerting to a service technician when an alarm occurs. In addition, the tool also provides data logging capability for data analysis.
Page 26: To Monitor Multiple A/C Units In The Network
• In the nVent HOFFMAN A.C. Monitor screen, click on Tools on the main menu • In the dropdown window, check the Use Ethernet and notice that Comm Port is now disabled • Select Single ACU Monitor tab, in the window click on the Device IP box and type the IP address that need to communicate to the network card •...
Page 27: Remote Access Control Pin-Out
– MAL-FUNCTION ALARM BLU88 RESERVED – UNIT REMOTE ON/OFF – – RESERVED – – RESERVED – GROUND – RESERVED – DATA (-) DATA (+) GROUND DATA (-) – DATA (+) – GROUND – © 2023 nVent 89217666 - 27 -...
Page 28: Technical Information
WITHOUT THE WRITTEN PERMISSION OF HOFFMAN ENCLOSURES IS PROHIBITED. CHANGE WITH NEW PART NO. 89107580 CONTROLLER 9080715 MATERIAL REV. DESCRIPTION ECO/PDP SEE NOTES Hoffman Engineering Company 2100 Hoffman Way FINISH Anoka, Minnesota, 55303-750 © 2023 nVent 89217666 - 28 - Phone(763)421-2240 Fax(76...
Page 29: S06 Wire Diagram 300/500W
.XX ± .03 THREE PLACE .XXX ± .015 CHECKED HOLE DIA ± .005 1P UC2SE ANGLES ± 2 APPROVED SolidWorks Drawing DATE 2013/12/20 SIZE DRAWING NO. SHEET THIRD ANGLE © 2023 nVent 89217666 - 29 - 89107579 NOT SCALE DRAWING PROJECTION...
Page 30: S06 Dimensional Drawings
POWER AND ALARM OUTPUT CONNECTOR 20.94 21.65 COOL 7.06 ELECTRONIC 7.40 AIR OUT CONTROLLER 1.73 AMBIENT AIR IN 5.00 M6 MOUNTING THREADS(4) OPTIONAL FIELD-INSTALLED,CLEANABLE REUSABLE, ALUMINUM INLET FILTER MOUNTS 10.32 BEHIND PLASTIC LOUVER © 2023 nVent 89217666 - 30 -...
Page 31: S06 Installation Instruction
Settings on page 16 for controller adjustment and operation. 9.38 11.50 10.44 21.65 20.63 19.44 21.65 20.25 7.74 9.61 10.00 .315 .315 11.02 11.02 Surface Mount Full Recess Mount Figure 7 S06 300W Cutout Drawing Dashed Lines Represent The Air Conditioner © 2023 nVent 89217666 - 31 -...
Page 32: S06 500W Cutout Drawing
21.65 20.63 20.94 21.65 20.15 7.40 12.05 7.56 10.32 10.00 .315 .315 11.02 11.02 Surface Mount Partial and Full Recess Mount Figure 8 S06 500W Cutout Drawing Dashed Lines Represent The Air Conditioner © 2023 nVent 89217666 - 32 -...
Page 33: S06 Unit Characteristics
Factory Default Setpoint (°C Controller) Factory Default Setpoint (°F Controller) SOUND LEVEL At 1 M (dBA) UNIT CONSTRUCTION Material Steel Steel Finish RAL 7035 RAL 7035 UNIT DIMENSIONS Height (mm) Width (mm) Depth (mm) Weight (kg) © 2023 nVent 89217666 - 33 -...
Page 34: S06 Components
89105488SP (4) Structural Parts Louvered Grill Panel 89105442SP 89105442SP 89105442SP 89105442SP Panel Strike Clip (Pkg. 4) 90245472SP 90245472SP 90245472SP 90245472SP Body Catch Clip (Pkg. 4) 89105486SP 89105486SP 89105486SP 89105486SP Body Front Shell 89104023SP 89104023SP © 2023 nVent 89217666 - 34 -...
Page 35: S10 Models 1000/1500W
CHECKED HOLE DIA ± .003 2000W 115V UC2SE APPROVED ANGLES ± 2 2013/12/20 SolidWorks Drawing DATE THIRD ANGLE SIZE DRAWING NO. 89107582 NOT SCALE DRAWING PROJECTION SHEET 1 OF 1 89107584 REV. F © 2023 nVent 89217666 - 35 -...
Page 36: 1500W 115V
CHECKED HOLE DIA ± .003 2000W 115V UC2SE APPROVED ANGLES ± 2 2013/12/20 SolidWorks Drawing DATE SIZE DRAWING NO. THIRD ANGLE 89107582 NOT SCALE DRAWING PROJECTION SHEET 1 OF 1 89107586 REV. I © 2023 nVent 89217666 - 36 -...
Page 37: 1500W 460V
MATERIAL: SEE McLEAN SPEC #10-1370-00. RITTEN PERMISSION OF OSURES IS PROHIBITED. CHANGE WITH NEW 107589 CONTROLLER 9080715 2022/ REV. DESCRIPTION ECO/PDP E NOTES © 2023 nVent 89217666 - 37 - Hoffman Engineering Company 2100 Hoffman Way Anoka, Minnesota, 55303-7504, U.S.A.
Page 43: S10 Dimensional Drawing
SHUT DOWN AND ALARM OUTPUT CONNECTOR 37.44 1.78 ELECTRONIC CONTROLLER COOL AMBIENT AIR OUT 11.75 AIR IN 10.75 15.16 3.92 9.84 M8 MOUNTING OPTIONAL,FIELD-INSTALLED, CLEANABLE THREADS(8) M8 LIFT LUGS REUSABLE,ALUMINUM INLET FILTER MOUNTS BEHIND PLASTIC LOUVER © 2023 nVent 89217666 - 43 -...
Page 44: S10 Installation Instruction
10.04 37.44 36.22 35.94 10.75 12.19 15.16 14.14 .375 .375 9.84 14.56 15.75 15.75 Surface Mount Partial and Full Recess Mount Figure 9 S10 1000/1500W Cutout Drawing Dashed Lines Represent The Air Conditioner © 2023 nVent 89217666 - 44 -...
Page 45: S10 Unit Characteristics (115V, 230V)
Factory Default Setpoint (°C Controller) Factory Default Setpoint (°F Controller) SOUND LEVEL At 1 M (dBA) UNIT CONSTRUCTION Material Steel Steel Finish RAL 7035 RAL 7035 UNIT DIMENSIONS Height (mm) Width (mm) Depth (mm) Weight (kg) © 2023 nVent 89217666 - 45 -...
Page 46: S10 Unit Characteristics (460V)
Factory Default Setpoint (°C Controller) Factory Default Setpoint (°F Controller) SOUND LEVEL At 1 M (dBA) UNIT CONSTRUCTION Material Steel Steel Finish RAL 7035 RAL 7035 UNIT DIMENSIONS Height (mm) Width (mm) Depth (mm) Weight (kg) © 2023 nVent 89217666 - 46 -...
Page 47: S10 Components (1 Phase)
89105411SP 89105411SP 89105411SP 89105411SP 89105411SP Panel Strike Clip (Pkg. 4) 90245472SP 90245472SP 90245472SP 90245472SP 90245472SP Body Catch Clip (Pkg. 4) 89105486SP 89105486SP 89105486SP 89105486SP 89105486SP Body Front Shell 89102598SP 89102598SP 89102598SP 89102598SP 89102598SP © 2023 nVent 89217666 - 47 -...
Page 48: S10 Components (3 Phase)
Structural Parts Louvered Grill Panel 89105410SP (2) Controller Bezel Panel 89105411SP Panel Strike Clip (Pkg. 4) 90245472SP Body Catch Clip (Pkg. 4) 89105486SP Body Front Shell 89102598SP Relay, Overload 89098323SP Relay, Phase Monitor 89097986SP © 2023 nVent 89217666 - 48 -...
Page 49: S16 Models 2000/2500W
THREE PLACE (.XXX) ± .015 CHECKED HOLE DIA ± .003 2000W 230V UC2SE APPROVED ANGLES ± 2 2013/12/19 SolidWorks Drawing DATE THIRD ANGLE SIZE DRAWING NO. 89107586 NOT SCALE DRAWING PROJECTION SHEET 1 OF 1 © 2023 nVent 89217666 - 49 -...
Page 50 THREE PLACE (.XXX) ± .015 CHECKED HOLE DIA ± .003 2000W 3P UC2SE APPROVED ANGLES ± 2 2013/12/19 SolidWorks Drawing DATE THIRD ANGLE SIZE DRAWING NO. 89107589 NOT SCALE DRAWING PROJECTION SHEET 1 OF 1 © 2023 nVent 89217666 - 50 -...
Page 51: 2500W 230V
THREE PLACE (.XXX) ± .015 CHECKED HOLE DIA ± .003 UC2SE APPROVED ANGLES ± 2 2013/12/20 SolidWorks Drawing DATE SIZE DRAWING NO. THIRD ANGLE 89107591 NOT SCALE DRAWING PROJECTION 89107593 REV. J SHEET 1 OF 1 © 2023 nVent 89217666 - 51 -...
Page 52: 4000W 460V
DESCRIPTION ECO/PDP SEE NOTES Hoffman Engineering Company 2100 Hoffman Way Anoka, Minnesota, 55303-7504, U.S.A Phone(763)421-2240 Fax(763)421-15 TOLERANCE UNLESS NOTED NONE SCALE TITLE © 2023 nVent 89217666 - 52 - ONE PLACE (.X) ± .1 DRAWN TWO PLACE (.XX) ± .03...
Page 58: S16 Dimensional Drawing
SHUT DOWN AND ALARM 62.19 OUTPUT CONNECTOR 1.78 ELECTRONIC CONTROLLER COOL AIR OUT 12.80 11.75 9.94 AMBIENT AIR IN 10.82 13.43 M8 MOUNTING 11.02 M8 LIFT LUGS OPTIONAL,FIELD-INSTALLED,CLEANABLE THREADS(10) REUSABLE,ALUMINUM INLET FILTER MOUNTS BEHIND PLASTIC LOUVER. © 2023 nVent 89217666 - 58 -...
Page 60: S16 Installation Instruction
1580 1580 12.80 12.19 9.44 21.83 10.82 11.02 14.56 .375 .375 (10) 15.75 15.75 Surface Mount Partial and Full Recess Mount Figure 10 S16 2000/2500W Cutout Drawing Dashed Lines Represent The Air Conditioner © 2023 nVent 89217666 - 60 -...
Page 61: S16 4000W Cutout Drawing
Surface Mount Partial Recess Mount Figure 11 S16 4000W Cutout Drawing Dashed Lines Represent The Air Conditioner © 2023 nVent 89217666 - 61 -...
Page 62: S16 Unit Characteristics (230V)
Ambient Side Factory Default Setpoint (°C Controller) Factory Default Setpoint (°F Controller) SOUND LEVEL At 1 M (dBA) UNIT CONSTRUCTION Material Finish UNIT DIMENSIONS Height (mm) 1580 1580 Width (mm) Depth (mm) Weight (kg) © 2023 nVent 89217666 - 62 -...
Page 63: S16 Unit Characteristics (460V)
Factory Default Setpoint (°C Controller) Factory Default Setpoint (°F Controller) SOUND LEVEL At 1 M (dBA) UNIT CONSTRUCTION Material Steel Finish RAL 7035 UNIT DIMENSIONS Height (mm) 1580 1580 1580 Width (mm) Depth (mm) Weight (kg) © 2023 nVent 89217666 - 63 -...
Page 64: S16 Components (230V)
Structural Parts Louvered Grill Panel 89105410SP (4) 89105410SP (4) Controller Bezel Panel 89105411SP 89105411SP Panel Strike Clip (Pkg. 4) 90245472SP 90245472SP Body Catch Clip (Pkg. 4) 89105486SP 89105486SP Body Front Shell 89107454SP 89102801SP © 2023 nVent 89217666 - 64 -...
Page 65: S16 Components (460V)
89105411SP Panel Strike Clip (Pkg. 4) 90245472SP 90245472SP 90245472SP Body Catch Clip (Pkg. 4) 89105486SP 89105486SP 89105486SP Body Front Shell 89107454SP 89102801SP 89104006SP Transformer,460/230V 101006128SP 101006128SP 101006128SP Relay, Phase Monitor 89097986SP 89097986SP 89097986SP © 2023 nVent 89217666 - 65 -...
Page 66: Maintenance
CAUTION Operation of the air conditioner in areas containing airborne caustics or chemicals can rapidly deteriorate filters, condenser coils, blowers and motors, etc. Contact nVent Equipment Protection for special recommendations. © 2023 nVent 89217666...
Page 67: Maintenance / Inspection Recommendations
Check the compressor for proper Refrigeration System operation, mounting and visible signs of exposure to high heat. Update maintenance records on the unit and in the Maintenance Records management system. © 2023 nVent 89217666 - 67 -...
Page 68: Basic Air Conditioning Trouble Shooting Check List - Remote Access Control Version
6. The compressor and the condenser (Ambient or HOT air) impeller(s) should turn on. Is there adequate airflow? YES, proceed to step 8. NO, possible problem: » Open motor winding(s) » Stuck impeller(s) Repair or Replace defective part » Obstructed wheel(s) » Defective motor capacitor(s) © 2023 nVent 89217666 - 68 -...
Page 69: Basic Air Conditioning Trouble Shooting Checklist
Short in system Drain plugged Drain tube kinked Getting water in enclosure Enclosure not sealed (allowing humidity in) Mounting gasket damaged For additional support, refer to nVent Cooling Sales and Service Contacts on page 4. © 2023 nVent 89217666 - 69 -...
Page 70: 3-Phase Basic Air Conditioning Trouble Shooting Check List - Remote Access Control Version
Restart Time Delay mode. Within 6 minutes, symbol 1 should display without flashing. Is symbol 1 displayed without flashing? YES, proceed to step 7. NO, possible problem: » Unit still in Recycle Time Delay mode » Enclosure temperature below cooling Wait and/or heat enclosure thermistor T1 setpoint temperature © 2023 nVent 89217666 - 70 -...
Page 71: 3-Phase Symptoms And Possible Causes - Remote Access Control Version
Unit blows breakers Short in system Drain plugged Drain tube kinked Getting water in enclosure Enclosure not sealed (allowing humidity in) Mounting gasket damaged For additional technical support, contact nVent Equipment Protection at 800-896-2665. © 2023 nVent 89217666 - 71 -...
Page 72: F-Gas Information - S06 Models
737 Gramów 850 Gramów 1247 Gramów Equivalent 1.01 Tons 1.05 Tons 1.22 Tons 1.78 Tons Equivalent 1,01 Tonnen 1,05 Tonnen 1,22 Tonnen 1,78 Tonnen Ekwilalent 1,01 Tony 1,05 Tony 1,22 Tony 1,78 Tony © 2023 nVent 89217666 - 72 -...
Page 76 2100 Hoffman Way Anoka, MN 55303 USA +1.763.422.2211 +1.763.576.3200 nVent.com P/N 89217666 Rev. B 89217666 © 2023 nVent...

This manual is also suitable for:

Spectracool s0605 6g series Spectracool s1010 6g series Spectracool s1015 6g series Spectracool s1620 6g series Spectracool s1625 6g series Spectracool s1640 6g series ... Show all

nvent SPECTRACOOL S0603 6G Series Instruction Manual

Quick Links

Troubleshooting

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for nvent SPECTRACOOL S0603 6G Series

Summary of Contents for nvent SPECTRACOOL S0603 6G Series

This manual is also suitable for:

Table of Contents