Table of Contents
Advertisement
4. Add an egress port by placing the cursor on the desired port. Select with the left mouse button. Drag
the port to the Egress panel and release.
5. Select Configure.
The Configure panel will be displayed.
6. Select GRE RX Only.
7. Enter the Tunnel IP Address, (VXLAN Header DIP).
8. Enter the Remote IP Address, (VXLAN Header SIP).
9. Enter the Key, (1-16777215).
The default VXLAN Header SMAC is automatically defined by the system. There are five
predefined SMACs.
10. Select Advanced to select an alternative DMAC or to manually enter the DMAC, (VXLAN Header DMAC).
11. Select Advanced to add a VLAN ID, optional, (1-4095).
12. Select Set.
13. Select Cancel to disregard.
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2023 Garland Technology, LLC. All rights reserved.
User Guide
PacketMAX | GAA10G20AC | 4.23.1
Advertisement
Table of Contents
