Table of Contents
Advertisement
Programme end
End lights up in the display panel and
the ‹ and ® displays are off.
If the ä display flashes, this
Note:
informs you to run the äDrum Clean î
programme or any other programme at
a washing temperature of at least
60 °C.
Removing laundry/switching
off the appliance
Open the loading door and remove
1.
the laundry.
Switch off the appliance.
2.
Turn off the tap.
3.
Not required for AquaStop
Note:
models.
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
Wipe the rubber gasket dry.
■
Leave the washing machine door
■
and detergent drawer open so that
any residual water can dry away.
Always wait for the end of the
■
programme, otherwise the appliance
may still be locked. Then switch on
the appliance and wait for it to
unlock.
Appliance settings
Q
Appliance settings
Y ou can change the following settings
A p p l i a n c e s e t t i n g s
in the control and display panel:
The volume of the information signal
■
(e.g. at the end of the programme),
The volume of the operating signals,
■
The brightness of the operating and
■
display field,
Select/deselect the memory function
■
for drum care. ~ Page 24
You will need to activate the setting
mode in order to change these settings.
Activating the setting mode
Switch on the appliance. The
1.
settings for the current programme
are displayed.
Touch the control panel à.
2.
The setting mode is activated and the
displays for the information signals Q
and the preset volume light up.
You can now change the settings:
Changing the signal volume
To do this, touch N or M on the control
panel until the required adjustment
value for the volume of the information
signals appears:
Adjustment values:
0
off
1
quiet
2
Medium
3
loud
4
very loud
Exit setting mode or:
Touch à again. The display for the
operating signals C and the preset
volume light up.
Touch N or M to change the
adjustment value (as above).
Exit setting mode or:
en
35
Advertisement
Table of Contents
