Table of Contents
Advertisement
NLusage
honor. You can change or deactivate
activated settings by pressing the
corresponding button on the display
again.
PAY ATTENTION!
Violent action on the display may
cause damage.
▶ Do not exert strong pressure on
the display.
Do not press on the display with
▶
pointed or sharp objects.
1
6 Before first use
B prepare the device for use
use.
6.1 Starting a wash cycle
without laundry
Your device has been thoroughly
checked before leaving the factory. To
remove any residual water, wash
without any laundry the first time.
Press .
1.
The power-on process takes a few
seconds.
The program Drum Cleaninn
2.
.
couple
e
the d
ur close.
3.
a
The W
4.
medium drawer
20
2
pull out.
Fill powder detergent into
5.
compartment II.
To avoid foaming, use only half the
amount recommended by the
detergent manufacturer for light
soiling. Do not use wool or delicate
detergent.
Slide the detergent drawer into the
6.
appliance.
To start the program, press .
7.
aThe display shows the remaining
program duration.
aAfter the program end, it shows
display: End.
Start the first wash cycle or press to
8.
switch off the appliance.
→ "The Ministry in Essence",
Page 32
Advertisement
Table of Contents
