Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch WDU28561TR
Summary of Contents for Bosch WDU28561TR
- Page 1 Washer dryer WDU28561TR [en] User manual and installation instructions...
- Page 2 Your new washer dryer Display rules : Warning! You have chosen a Bosch washer dryer. This combination of symbol and signal Please take a few minutes to read and word indicates a possibly dangerous become familiar with the advantages of situation.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use Sensors ....45 Intended use Unbalanced load detection system . 45 This appliance is intended for private ■ I n t e n d e d u s e domestic use only. -
Page 5: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 6: Installation
Safety instructions The appliance must not be Warning ■ supplied through an external Risk of poisoning! switching device, such as a Detergents and care products timer, or connected to a may result in poisoning if circuit that is regularly consumed. switched on and off by a If accidentally swallowed, seek utility. - Page 7 Safety instructions The mains cable must not be Warning kinked, crushed or altered, and Risk of injury! must not come into contact with The appliance is very heavy. ■ any heat sources. Lifting it may result in injury. Do not lift the appliance on Warning your own.
-
Page 8: Operation
Safety instructions If the water hoses are altered Operation ■ or damaged, this may result Warning in material damage or Risk of explosions/fire! damage to the appliance. Laundry that has come into The water hoses must not be contact with solvents, oil, wax, kinked, crushed, altered or wax remover, paint, grease or severed. - Page 9 Safety instructions Certain objects may ignite Warning ■ when drying is in progress, Risk of poisoning! or even cause the appliance Poisonous fumes may be given to catch fire or explode. off by cleaning agents that Remove any lighters or contain solvents, e.g.
-
Page 10: Cleaning/Maintenance
Safety instructions If you pour the wrong Warning ■ quantity of detergent or Eye/skin irritation! cleaning agent into the Detergent and care products appliance, this may result in may spray out if the detergent material damage or damage drawer is opened while the to the appliance. - Page 11 Safety instructions Repairs and any other work Warning ■ on the appliance must only Risk of injury/material be conducted by our damage/damage to the customer service or by an appliance! electrician. The same applies The use of spare parts and for replacing the mains cable accessories supplied by other (when necessary).
-
Page 12: Environmental Protection
Environmental protection Reduce the washing temperature for Environmental lightly and normally soiled laundry. protection At low temperatures, the appliance ■ consumes less energy. For light to P ackaging/used appliance normal soiling, lower temperatures E n v i r o n m e n t a l p r o t e c t i o n than indicated on the care label are Dispose of packaging in an also sufficient. -
Page 13: Positioning And Connecting
Positioning and connecting Mains lead Positioning and Bag: connecting Installation and operating ■ instructions S tandard accessories Customer Service location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the appliance for transport Note:... -
Page 14: Installation Surface
Positioning and connecting If the hose and mains cables are not On wooden joist floors, install the Note: ■ routed properly, there is a risk of appliance: tripping and injury. In a corner, if possible, ■ Lay hoses and cables in such a way On a water-resistant wooden board ■... - Page 15 Positioning and connecting Keep the screws and sleeves in b) Remove the sleeves. Note: a safe place. Fit the covers. Take the hoses out of the holders. Lock the covers firmly in place by applying pressure to the snap-in hooks. Unscrew and remove all four transport brace screws.
-
Page 16: Hose And Cable Lengths
Positioning and connecting Hose and cable lengths Connection on left side ( ~ 105 cm 0 ~ 150 cm 8 ~ 95 cm @ 60 cm ~ 100 cm Connection on right side ( ~ 60 cm 0 ~ 195 cm 8 ~ 140 cm @ 60 cm ~ 100 cm The following are available from... -
Page 17: Water Inlet
Positioning and connecting Water inlet Connection Connect the water supply hose to Warning the water tap (¾" = 26.4 mm) and to Risk of death! the appliance: There is a risk of electric shock if you – Model: Standard touch live components. Do not immerse the Aqua-Stop safety valve* in water (it contains an electric valve). -
Page 18: Water Outlet
Positioning and connecting Open the water tap carefully, Connection checking the leak tightness of the Drainage into a siphon connection points. The screw ■ The connection point must be connection is under mains water secured using a hose clamp with a pressure. -
Page 19: Alignment
Positioning and connecting Alignment Electrical connection Level the appliance using a spirit level. Warning Incorrect levelling may result in intense Risk of death! noise, vibrations and "wandering". There is a risk of electric shock if you touch live components. Loosen the lock nuts using a Never touch or hold the mains plug ■... -
Page 20: Before Washing For The First Time
Positioning and connecting Before washing for the first Transportation time e.g. when moving home The appliance was inspected Preparatory work: thoroughly before leaving the factory. To Turn off the water tap. remove any residual test water, run the Reduce the water pressure in the Tambur Temizleme (Drum Clean) supply hose. - Page 21 Positioning and connecting Insert all four sleeves. Before switching on the appliance again: Notes The transport braces must be ■ removed. ~ "Removing the transport locks" on page 14 Pour approx. 1 litre of water into ■ dispenser II, select the Boşaltma (Drain) programme and start.
-
Page 22: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance A ppliance G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Control panel Loading door Service flap... -
Page 23: Control Panel
Getting to know the appliance Control panel ( Programmes that can be selected. 0 Touch-Display 8 Start/Pause button Touch A button to start, interrupt (e.g. reload washing) and cancel the programme. @ Power button Press the # button to switch the appliance on/off. -
Page 24: Touch-Display
Getting to know the appliance Touch-Display Additional programme settings Programme default settings Display Setting T (Prewash) Display Setting Description O (Rinse plus) — - 90° Temperature Temperature that Z (Water plus) can be set in °C p (Easy iron) — = cold ~ "Additional programme settings"... -
Page 25: Laundry
Laundry Sorting laundry Laundry Sort your laundry according to the care P reparing laundry for washing instructions and manufacturer's L a u n d r y information on the care labels, depending on: Protecting your laundry and appliance Type of fabric/fibre ■... -
Page 26: Preparing Laundry For Drying
Detergents and care products Preparing laundry for drying Detergents and care products To ensure an even drying result, Note: sort the laundry according to the: Type of fabric Y ou can protect your appliance and ■ Care symbols which are indicated on D e t e r g e n t s a n d c a r e p r o d u c t s your laundry by selecting and using the ■... -
Page 27: Detergent Recommendation
Detergents and care products Detergent recommendation This information is intended to help you to choose the right detergent for your items. Fabrics Detergent Programme Temperature Heat-resistant white fab- Standard detergent with optical Cottons From cold up to 90 °C rics made from cotton or brighteners linen Coloured fabrics made... -
Page 28: Overview Of Programmes
Overview of programmes Overview of programmes S electable programme O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry Options/Information Name of the programme Max. load for washing/ Max. - Page 29 Overview of programmes Programme/Type of laundry Options/Information Pamuklu (Cottons) 10.0 (5,0**) kg/6,0 kg Hard-wearing fabrics, heat-resistant fabrics made of cotton or — - 90 °C linen. 400 - 1400 rpm Speed, Z (Water plus), p (Easy iron), 2 (Hygiene care), O (Rinse plus), T (Prewash), â...
-
Page 30: Wash+Dry
Overview of programmes Programme/Type of laundry Options/Information Narin/İpek (Delicates/Silk) 2,0 kg/- For delicate, washable fabrics, e.g. made of silk, satin, synthetic — - 40 °C fibres or blends (e.g. silk blouses, silk scarves). 2 - 800 rpm Z (Water plus), p (Easy iron), O (Rinse plus), T (Prewash), â... -
Page 31: Wash+Dry
Overview of programmes Programme/Type of laundry Options/Information Sıkma/Boşaltma (Spin/Drain) Single spinning program with selectable spin speed and subse- quent draining. To select the Boşaltma (Drain) program, set 2 - 1400 rpm the spin speed to 2 p (Easy iron), â (Memory) Wash+ Dry è... - Page 32 Overview of programmes Programme/Type of laundry Options/Information MyTime 2,0 kg/6,0 kg Mixed fabrics; for lightly soiled laundry made of cotton and syn- — - 40 °C thetics. 400 - 1200 rpm The length of the programme can be set each time. The maxi- Z (Water plus), p (Easy iron), O mum programme length is 60 minutes for washing and 120 (Rinse plus), â...
-
Page 33: Drying Table
Overview of programmes Drying table Estimated drying time (min) Recommended drying programme Drying load ö (Iron » (Cup- ¾ (Cup- (kg) dry) board dry) board dry+) Pamuklu (Cottons) + Dry 1.0-2.0 40-50 50-70 65-90 2.0-4.0 50-75 70-95 90-135 4.0-6.0 75-90 95-120 135-160 Mix + Dry... -
Page 34: Programme Default Settings
Programme default settings Finish in Programme default Before starting the programme, you settings can preselect the programme end ("Finish in" time) in 0.5h increments (h = Y ou can change the default settings for hour) up to a maximum of 24 hours. P r o g r a m m e d e f a u l t s e t t i n g s selected programmes. -
Page 35: Wash+ Dry Or Dry
Programme default settings After starting the programme (if a ö (Iron dry): Normal, single-layered ■ “Finish in” time has been selected and laundry that still needs to be damp the programme has not yet started), you after drying and is suitable for can change the preselected number of ironing or hanging up. -
Page 36: Additional Programme Settings36
Additional programme settings T (Prewash) Additional programme Prewash for heavily soiled laundry. settings Touch T (Prewash) to activate or deactivate it. You can find possible additional N ote: A d d i t i o n a l p r o g r a m m e s e t t i n g s programme settings in the overview;... -
Page 37: P (Easy Iron)
Additional programme settings p (Easy iron) Á (Silent) A special operation using reduced spin Function designed for noise reduction. speed followed by fluffing to help Washing and drying process noise will reduce creasing. be reduced, and ending signal will be switched off. -
Page 38: Operating The Appliance
Operating the appliance Switching on the appliance/ Operating the selecting a programme appliance Press the # button till the indicator P reparing the appliance lamp lights up, release the button. The O p e r a t i n g t h e a p p l i a n c e appliance is switched on. -
Page 39: Placing Laundry Into The Drum
Operating the appliance To activate/ deactivate Wash+ Dry or Placing laundry into the drum Dry functions and drying levels touch Open the door, place laundry in the the half lit buttons on the display. drum, make sure that no items of laundry are trapped between the door and the rubber seal, and close the door. -
Page 40: Dosing And Adding Detergent And Care Products
Operating the appliance Dosing and adding detergent Pour in detergent and/or cleaning product. and care products Caution! Damage to the appliance Detergents and agents for the pretreatment of laundry (e.g. stain remover, prewash sprays, etc.) may damage the surfaces of the appliance. Keep these agents away from the surfaces of the appliance. -
Page 41: Starting The Programme
Operating the appliance Starting the programme Measuring aid A* for liquid detergent *depending on the model Touch and hold A (Start/Reload) button for 1~2 seconds, then release Position the measuring aid A for the button. The programme starts and measuring the correct amount of liquid the appliance door is locked. -
Page 42: Adding/Removing Laundry
Operating the appliance Adding/removing laundry Cancel the programme After starting the programme (only for For programmes washing at high washing), you can add or remove temperatures: laundry if necessary. Touch the A (Start/Reload) button. To cool down laundry: Select Touch the A (Start/Reload) button. Durulama(Rinse). -
Page 43: Removing Laundry/Switching Off The Appliance
Appliance settings Removing laundry/switching Appliance settings off the appliance A utomatic switch-off Press the # button till the indicator A p p l i a n c e s e t t i n g s lamp turns off, release the button. If the appliance is not operated for The appliance is switched off. - Page 44 Appliance settings End signal Brightness You can select position 1 and use the Possible setting values: 1 - 4 ˜ button to adjust the volume of the You can select position 3 and use the end signal, e.g. ‘- „. ˜...
-
Page 45: Sensors
Sensors Appliance housing/control Sensors panel U nbalanced load detection Remove the detergent residue S e n s o r s ■ system immediately. Wipe the housing and the control ■ The automatic unbalanced load panel with a soft, damp cloth. detection system detects imbalances Do not use abrasive cloths, sponges ■... -
Page 46: Detergent Drawer And Housing
Cleaning and maintenance Detergent drawer and housing Fit the insert and lock it in place (push the cylinder onto the guide pin). If the appliance contains detergent or fabric softener residues: Pull out the detergent drawer. Press down the insert and fully remove the drawer. -
Page 47: Drain Pump Is Blocked
Cleaning and maintenance Drain pump is blocked Carefully unscrew the pump cover; residual water may leak out. Clean the interior, pump cover Turn the water tap off to prevent Note: thread and pump housing. The more water from flowing in and to impeller in the drain pump must be ensure that it is drained via the pump. -
Page 48: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance The drain hose at the siphon Clean the filters: is blocked Disconnect the hose from the rear of the appliance. Press the # button. Pull out the mains plug. Loosen the hose clamp. Carefully remove the drain hose; residual water may leak out. -
Page 49: Faults And What To Do About Them
Faults and what to do about them Press the # button. Pull out the Faults and what to do mains plug. Open the service flap. about them E mergency release F a u l t s a n d w h a t t o d o a b o u t t h e m E.g. -
Page 50: Information On The Display Panel
Faults and what to do about them Information on the display panel Display Cause/Remedy Flashes fast + signal: The door was opened and the water level is too high. œ ■ Close the door, continue the programme with A button or select Boşaltma (Drain) programme. -
Page 51: Faults And What To Do About Them
Faults and what to do about them Display Cause/Remedy The indicator lamp of Run the Tambur Temizleme (Drum Clean) 90°C programme to clean and care the Tambur Temi- for the drum and the outer tub. zleme (Drum Clean) Notes programme flashes Run the programme without laundry. - Page 52 Faults and what to do about them Faults Cause/Remedy The programme will not Have you touched the A (Start/Reload) button or selected ñ (Finish ■ start. in) time? Is the door closed? ■ Childproof lock activated? Deactivate childproof lock. ■ Shop mode activated? If the display shows àœ©˜...
- Page 53 Faults and what to do about them Faults Cause/Remedy Compartment M is not Remove the insert. Clean the detergent drawer and reinsert it. rinsed out completely. The programme is taking Not a fault – the unbalanced load detection system is adjusting an imbal- ■...
- Page 54 Faults and what to do about them Faults Cause/Remedy Drying duration extended. Run the Tambur Temizleme (Drum Clean) — (cold) programme to ■ remove fluff which has collected in the washer drum during the drying phase. If the ambient temperature is higher than 30 °C, this may extend the drying ■...
-
Page 55: After-Sales Service
After-sales service After-sales service I f you cannot rectify a fault yourself, A f t e r - s a l e s s e r v i c e (~ "Faults and what to do about them" on page 49), please contact our after- sales service. -
Page 56: Consumption Values
Consumption values Consumption values T he following information is provided in accordance with the EU-Ecodesign- C o n s u m p t i o n v a l u e s Regulation. The values given for programs other than the Eco 40-60 are indicative only and were determined in accordance with the applicable standard EN60456 and EN62512. -
Page 57: Technical Data
Technical data Technical data Aqua-Stop warranty D imensions: O nly for appliances with Aqua-Stop T e c h n i c a l d a t a A q u a - S t o p w a r r a n t y 84,8 cm x 59,8 cm x 62,0 cm In addition to warranty claims against (height x width x depth) - Page 60 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.